9 inch aluminum sanding disc?
Moderator: admin
-
- Gold Member
- Posts: 80
- Joined: Thu May 27, 2021 12:28 pm
9 inch aluminum sanding disc?
Does anybody know if Shopsmith ever made a 9 inch aluminum sanding disc back in the early days? I have one, but I wasn’t sure if it’s Shopsmith brand. I know they made a larger aluminum sanding disc, but just not sure about the 9 inch model. It has 804033 cast into it as a possible old SS part number? See attached photos. Any info is much appreciated.
- Attachments
-
- 691ADECC-8743-4732-9C4E-B96BDCAA6B10.jpeg (572.19 KiB) Viewed 1852 times
-
- 4685403F-914F-44A9-B782-A4894BC78C5E.jpeg (505.61 KiB) Viewed 1852 times
Re: 9 inch aluminum sanding disc?
9 inch sanding disk for the Sawsmith radial arm saw.
see page 2 in the Sawsmith accessories catalogue
http://vintagemachinery.org/pubs/detail.aspx?id=3282
see page 2 in the Sawsmith accessories catalogue
http://vintagemachinery.org/pubs/detail.aspx?id=3282
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
- chapmanruss
- Platinum Member
- Posts: 3780
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: 9 inch aluminum sanding disc?
As Ron indicated there was a 9" Sanding Disk made for the Radial Arm Saw. I don't believe the one you have is from Yuba or Magna American, the companies making the Shopsmith line during the time the SawSmith Radial Arm Saw was in production. That Sanding Disk had either part number 27 101 or 505549 depending on if it was made before or after the part numbers changed. A picture of the SawSmith Radial Arm Saw 9" Sanding Disk is shown below.
_
_
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: 9 inch aluminum sanding disc?
Following... these are pretty hard to find based on trying to find parts for my SawSmith RAS. Thanks for posting pictures.
-
- Gold Member
- Posts: 80
- Joined: Thu May 27, 2021 12:28 pm
Re: 9 inch aluminum sanding disc?
If anyone is interested in purchasing this 9 inch aluminum sanding disc, let me know before I post it on eBay. I’d rather sell it inexpensively to one of my fellow Shopsmith forum people because you guys have helped me enormously over the years.
Re: 9 inch aluminum sanding disc?
Hey there, don’t know if you still are looking for information, but this disc looks like a Craftsman part/casting number. 5/8 arbor single set screw. I would be interested in purchasing if you still have as mine warped and then broke in the flattening process. Thanks much. EBAR123