Saw this on New Yankee Workshop--?

Forum for people who are new to woodworking. Feel free to ask questions or contribute.

Moderator: admin

drl
Gold Member
Posts: 231
Joined: Mon Dec 11, 2006 2:28 pm
Location: Brooklyn Park, MN

Saw this on New Yankee Workshop--?

Post by drl »

I was watching Norm this morning on NYW making an antique maple wash basin table. He was gluing up some pieces for the top and lower shelf using biscuits. He applied glue only to the biscuit grooves and not along the entire edge as I would do. Norm then proceeded to clamp the pieces together and I did not see any glue squeeze out along the joint. It would seem that the joint would not be as strong as it would be if glue had been applied the entire length of the pieces. Have I been over-gluing? Or was some TV editing been over used? A new procedure? I need an opinion from the experts.
Regards,
Dwight
Gene Howe
Platinum Member
Posts: 3219
Joined: Wed Jul 26, 2006 7:52 pm
Location: Snowflake, AZ

Post by Gene Howe »

drl wrote:I was watching Norm this morning on NYW making an antique maple wash basin table. He was gluing up some pieces for the top and lower shelf using biscuits. He applied glue only to the biscuit grooves and not along the entire edge as I would do. Norm then proceeded to clamp the pieces together and I did not see any glue squeeze out along the joint. It would seem that the joint would not be as strong as it would be if glue had been applied the entire length of the pieces. Have I been over-gluing? Or was some TV editing been over used? A new procedure? I need an opinion from the experts.
Regards,
Dwight
I suspect that it was over zealous editing.
Gene

'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton
User avatar
beeg
Platinum Member
Posts: 4791
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

I THOUGHT he rolled glue on the edge, as he applied glue to the slots?
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

I did knot see it, but even Norm could have made a mistake. It makes no sense to me knot to glue the whole joint.
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

The norm for Norm as I recall is for him to roll on the glue then go back with his fancy pre-measure bottle and do the biscuit slots.

I did not see the same program you saw today... he was making some trays on our PBS channel.

Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

drl wrote:...Have I been over-gluing? Or was some ....
Dwight
Dwight- it is very hard to over-glue a joint. Any joint can be "under-clamped" thus not squeezing out the excess glue giving a poor joint that is only as strong a a piece of dry, hardened, glue.

After obtaining reasonably fresh glue, there are three major parts of making a good glue joint:
1) A tight fitting smooth (preferably knife cut) pair of mating faces,
2) Adequate glue to penetrate the cells and lumens of the wood,
3) Adequate clamping pressure for an appropriate time for the glue to penetrate and firm up.

You can have excessive squeeze-out from using excessive glue, but if that can be removed, there is no problem. On the other hand, to little glue or glue starvation, this yields a joint that lacks both in physical and molecular joint connection - a poor joint. A rule of thumb is strive for 20% of surface squeeze-out

If Norm didn't put glue on the edges of the joint - only on the biscuits - he had a very poor joint/connection.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
8iowa
Platinum Member
Posts: 1048
Joined: Tue Aug 01, 2006 9:26 am

Post by 8iowa »

I watched Norm briefly today as he was making a doughbox out of reclaimed pine. He used a roller to apply glue to the edges and had a bottle that deposited glue right into the biscuit slots.

Frankly, I thought that some of his table saw working methods were a little scary. He doesn't use a guard, and sometimes it looked as if his hands were rather close to the blade. He squared off one end of a board on a sled, and then turned it around and used the narrow edge against the fence to cut off and square the other end. With the slightest bind, the blade could be caught on the unguarded blade and be thrown off into space - or into your face.

Norm also cut a "dutchman" repair patch using a hand held router and templates. That was OK. However, he then freed the patch friom the wide board by running it edgewise, in a manner similar to resawing on the table saw, with the blade extending about 3" above the table. No feather guard was used, and the blade was trapped in the board. Personally, I would have used the bandsaw - much safer!
otee453
Gold Member
Posts: 31
Joined: Thu Sep 11, 2008 7:08 pm
Location: Topeka, KS

Post by otee453 »

I've noticed how Norms confort zone is MUCH smaller than mine.

I'm okay with being a wimp...



My 2 cents, The times I've seen no glue used is on dust skirts to allow for wood expansion of the case, but it is usually stated to do it that way. I watch alot of NYW episodes, and it seems to me that Norm likes glue.
User avatar
reible
Platinum Member
Posts: 11283
Joined: Thu Jul 20, 2006 12:08 pm
Location: Aurora, IL

Post by reible »

Hi,

I found I have that show on tape and maybe you were distracted for a brief second when they showed the glue being rolled on but it is there. On my tape is at 5:49 into the show...
[ATTACH]3310[/ATTACH]

I like to tape the shows because I'm often nodding off while watching just after lunch and missing stuff. Somehow the sounds of woodworking relax me and I often wake listen to the credits at the end of the show...

Ed
Attachments
norm glue.jpg
norm glue.jpg (167.66 KiB) Viewed 6215 times
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
drl
Gold Member
Posts: 231
Joined: Mon Dec 11, 2006 2:28 pm
Location: Brooklyn Park, MN

Post by drl »

The proof is in the pudding--seeing Ed taped the show would strongly suggest I need my eyes checked. Thanks to all for the info. I'll keep gluing like I have been.
Regards,
Dwight
Post Reply