I'm working on making a clock body that resembles a pocket watch. According to the plan it needs to be 13.5" in diameter. Will the SS lathe handle that diameter? What's its max? I did a search and there is 600 plus entries on the topic of the lathe. So I think I'll get my answer quicker this way.
Thanks guys!!!
Kevin
Maximum Diameter on the Lathe
Moderator: admin
Maximum Diameter on the Lathe
Kevin Collins
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
-
BuckeyeDennis
- Platinum Member
- Posts: 3625
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Re: Maximum Diameter on the Lathe
The max swing over the way tubes is 16-1/2" diameter. I'd recommend a speed reducer (or PowerPro) for anything that large, however.
Re: Maximum Diameter on the Lathe
I have the power pro so I should be good to go. Thanks Dennis!!!
Kevin Collins
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration
1x Mark 7 - 520
2x Mark 5 - 510
1x 1956 Mark 5 - 500 in need of restoration