Preview: Mark V double wide extension table
I thought someone might find this useful, I squared the edges with my 50 grit conical Disksander and bolted them together.
Mark V double wide extension table
Moderator: admin
Mark V double wide extension table
- Attachments
-
- IMG_0978.jpeg (472.67 KiB) Viewed 325 times
-
- IMG_0980.jpeg (414.32 KiB) Viewed 325 times
-
JPG
- Platinum Member
- Posts: 34331
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Mark V double wide extension table
Bottom mounting ?????
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Mark V double wide extension table
I would be interested in how that wire shelving is anchored to the SS legs, a close up picture would be very helpful. I have a piece of that shelving and was thinking about doing that to my SS.
-
chapmanruss
- Platinum Member
- Posts: 3332
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Mark V double wide extension table
An inch wider than the Extension Table Upgrade part number 555085. Can you show a picture of the bottom side showing how they are mounted?
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Re: Mark V double wide extension table
Mounting the wire shelf couldn't be any simpler. I used four 2 inch machine screws not bolts machine screws are threaded all the way, Bolt them to the legs and lay the wire shelf on top.
The two extension tables together I used masking tape to mark the holes, drill your first table with an 8th inch bit then take a piece of masking tape backwards over the hole with the sticky side out use a small piece of tape to hold it there punch your hole with a scratch all and slide the two tables together stick the tape on the other table and you have a perfect Mark for the drill.
The two extension tables together I used masking tape to mark the holes, drill your first table with an 8th inch bit then take a piece of masking tape backwards over the hole with the sticky side out use a small piece of tape to hold it there punch your hole with a scratch all and slide the two tables together stick the tape on the other table and you have a perfect Mark for the drill.
- Attachments
-
- IMG_0993.JPEG - 1.jpeg (258.33 KiB) Viewed 195 times
-
- IMG_0981.JPEG - 1.jpeg (473.93 KiB) Viewed 195 times