Looking for somebody who's done this; mounted a 4-jaw, self-centering wood lathe chuck onto their 10ER.
Lots of China stuff on eBay....not looking for that. Quill spindle is 5/8". If I have to buy an adapter that's OK.
Kevin
10ER/4-jaw self-centering wood chuck
Moderator: admin
-
Real1shepperd
- Gold Member
- Posts: 51
- Joined: Sat Nov 19, 2022 2:36 pm
Re: 10ER/4-jaw self-centering wood chuck
Nova makes them and I believe SS sells them with the adapter. No guarantee they are not made in China however.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
-
chapmanruss
- Platinum Member
- Posts: 3704
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: 10ER/4-jaw self-centering wood chuck
Kevin,
Since the Model 10ER has the same size 5/8" Reverse Tapered Spindle as the Mark series tools do, it will fit on the Model 10ER if it fits on the Mark series tools. I have the NOVA G3 Lathe Chuck, the same one Shopsmith sells, and I can use it on a Mark or a Model 10. It does need the adapter to fit on the 5/8" spindle which Shopsmith includes in their package. I recently bought a Model 10E that came with a NOVA Chuck that a previous owner had used for Lathe Turning. The Model 10's are popular for Wood Turning due to their heavier weight. You can also change pulleys on them to get slower speeds or get a Speed Changer which goes down to 425 RPM's.
Since the Model 10ER has the same size 5/8" Reverse Tapered Spindle as the Mark series tools do, it will fit on the Model 10ER if it fits on the Mark series tools. I have the NOVA G3 Lathe Chuck, the same one Shopsmith sells, and I can use it on a Mark or a Model 10. It does need the adapter to fit on the 5/8" spindle which Shopsmith includes in their package. I recently bought a Model 10E that came with a NOVA Chuck that a previous owner had used for Lathe Turning. The Model 10's are popular for Wood Turning due to their heavier weight. You can also change pulleys on them to get slower speeds or get a Speed Changer which goes down to 425 RPM's.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
-
Real1shepperd
- Gold Member
- Posts: 51
- Joined: Sat Nov 19, 2022 2:36 pm
Re: 10ER/4-jaw self-centering wood chuck
Thanks, I'll check out the Nova! Have the speed changer.
What does it mean when they say the chuck is "reversible"?
Kevin
What does it mean when they say the chuck is "reversible"?
Kevin
-
JPG
- Platinum Member
- Posts: 34949
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: 10ER/4-jaw self-centering wood chuck
With the proper adapter which allows it, rotation can be forwards(CCW) or reversed(CW).
The threads which attach the adapter to the chuck MUST be secured with a set screw(preferably with a pad to protect the adapter threads).
The threads which attach the adapter to the chuck MUST be secured with a set screw(preferably with a pad to protect the adapter threads).
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
BobCoates1953
- Gold Member
- Posts: 101
- Joined: Sun Jan 14, 2018 12:08 pm
- Location: Norristown, Pa
Re: 10ER/4-jaw self-centering wood chuck
I bought a oneway with tommy bars for my 10er. They have SS adapter fits internal to chuck. When I moved up to PM3520 all I had to do was replace the internal adapter with one for 1 1/4 8. Still in use after 10 yrs.
Bough it direct from oneway manf.
Bough it direct from oneway manf.
-
Real1shepperd
- Gold Member
- Posts: 51
- Joined: Sat Nov 19, 2022 2:36 pm
Re: 10ER/4-jaw self-centering wood chuck
The cheap 4-jaws on eBay are about $50-$65. I think my body/hands are worth more than that to me.
The aforementioned 4-jaws are around $200+. I'll save and get one of those. The SS ones come with an adapter in the 'kit'. The oneway is outa my league since my lathe turning will be occasional. I invented a safe way to gently polish old tools and the 4-jaw will work for that too.
Thanks guys!
Kevin
The aforementioned 4-jaws are around $200+. I'll save and get one of those. The SS ones come with an adapter in the 'kit'. The oneway is outa my league since my lathe turning will be occasional. I invented a safe way to gently polish old tools and the 4-jaw will work for that too.
Thanks guys!
Kevin