I designed a table extension for my Mark 510. It consist of electrical conduit, a piece of 9mm birch plywood, 6 3D printed parts, and a few #6 screws. Some of the advantages of this design are: it can be used as an infeed and/or outfeed table, it tilts with the table saw table, can be made in any size to fit the need, and possible can be used on the extension tables.
If interested in getting the 3D part files, let me know.
Table Saw Extension Table Idea
Moderator: admin
-
esmith2024
- Bronze Member
- Posts: 2
- Joined: Sat Feb 17, 2024 1:17 pm
Table Saw Extension Table Idea
- Attachments
-
- 20240713_110655.jpg (307.19 KiB) Viewed 5914 times
-
- 20240713_111031.jpg (246.53 KiB) Viewed 5914 times
-
- 20240713_112205.jpg (247.2 KiB) Viewed 5914 times
Re: Table Saw Extension Table Idea
That looks really slick! Looks like it would also be possible to use it with the 520 table.
Re: Table Saw Extension Table Idea
Great idea, thanks for joining the forum and posting a project as your first post! It's hard to tell from the last photo, but I assume that the printed parts are indeed below the level of the table's top? Does the board sit below the bottom of the miter gage slot so the miter bar will pass over the board?
Roy
Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Sawstop 3HP 36" PCS w/router table insert
Home designed and built CNC router, another CNC router
desktop size
CNCed G0704 milling machine
Laser engraver
Way too much other stuff and not enough space
Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Sawstop 3HP 36" PCS w/router table insert
Home designed and built CNC router, another CNC router
desktop sizeCNCed G0704 milling machine
Laser engraver
Way too much other stuff and not enough space
-
stihlsawer
- Silver Member
- Posts: 12
- Joined: Fri Jul 26, 2024 5:59 pm
- Location: Athens, TN
- Contact:
-
esmith2024
- Bronze Member
- Posts: 2
- Joined: Sat Feb 17, 2024 1:17 pm
Re: Table Saw Extension Table Idea
The parts and the plywood sit below the Table Top. I didn't add slots for the miter gauge; however, using 9mm plywood provides clearance so slots could be added if the plywood was supported underneath the slots.
Re: Table Saw Extension Table Idea
esmith2024,
Are you open to making the models available, paid or otherwise? I'd sure like to try the setup on my SSs.
Are you open to making the models available, paid or otherwise? I'd sure like to try the setup on my SSs.
Roy
Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Sawstop 3HP 36" PCS w/router table insert
Home designed and built CNC router, another CNC router desktop size
CNCed G0704 milling machine
Laser engraver
Way too much other stuff and not enough space
Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Sawstop 3HP 36" PCS w/router table insert
Home designed and built CNC router, another CNC router
desktop sizeCNCed G0704 milling machine
Laser engraver
Way too much other stuff and not enough space
-
dusty
- Platinum Member
- Posts: 21397
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Re: Table Saw Extension Table Idea
Now that is really slick and I'd bet very marketable. Offer me a set, please.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.