Restoration of Mark V / produced on 11/84

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

edma194
Platinum Member
Posts: 2080
Joined: Fri Jun 19, 2020 4:08 pm

Re: Restoration of Mark V / produced on 11/84

Post by edma194 »

GetterDone wrote: Sat Sep 14, 2024 12:03 am Almost finished with this bandsaw update that will go with this Mark V.
I got a Plug ordered for the access hole / My idea is a MacMaster plug :cool: .

I will drill the hole once I get the plug I ordered in hand.
I put a rubber grommet in the tension adjusting hole in mine to hold a short hex key in it ready to use.
Ed from Rhode Island

510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
GetterDone
Gold Member
Posts: 194
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Restoration of Mark V / produced on 11/84

Post by GetterDone »

edma194 wrote: Fri Oct 04, 2024 1:57 pm
GetterDone wrote: Sat Sep 14, 2024 12:03 am Almost finished with this bandsaw update that will go with this Mark V.
I got a Plug ordered for the access hole / My idea is a MacMaster plug :cool: .

I will drill the hole once I get the plug I ordered in hand.
I put a rubber grommet in the tension adjusting hole in mine to hold a short hex key in it ready to use.
Good Idea about the short key in place. :)
1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
GetterDone
Gold Member
Posts: 194
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Restoration of Mark V / produced on 11/84

Post by GetterDone »

Working on putting it back together. :)

I liked the idea of Bluing the parts that a member here done on their Restoration.

I just ordered the wrong stuff. :rolleyes:
The search sent me down the Rabbit hole. :eek:

I done a Duck Duck search, and it said it will be Okay. :)

We will see. :D

Here is before Pictures 1ST attempt. :cool:
sss.jpg
sss.jpg (42.63 KiB) Viewed 389 times
sss1.jpg
sss1.jpg (42.48 KiB) Viewed 389 times
sss2.jpg
sss2.jpg (58.7 KiB) Viewed 389 times
I will post after pictures.
It looked okay when I set it down to go inside for the night.
1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
User avatar
JPG
Platinum Member
Posts: 35055
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Restoration of Mark V / produced on 11/84

Post by JPG »

FWIW, the quill is NOT aluminum.

I think the rust spots need to be removed first.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
GetterDone
Gold Member
Posts: 194
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Restoration of Mark V / produced on 11/84

Post by GetterDone »

JPG wrote: Tue Oct 08, 2024 10:46 pm FWIW, the quill is NOT aluminum.

I think the rust spots need to be removed first.
Yeah

That why I stated that I ordered the wrong Stuff. :D

I should have taken pictures of when I used Scotch Brite on it.
I cleaned it well.

It looked a Lot better after coated with this stuff.

I think it will need a Second coat as things always do. :)

I will order the stuff for Metal also because I liked how this worked,

I will post pictures of first coat for Example.

Here is the Research of is it okay to use Aluminum Blackening kit on steel.

Yes
Yes, it is okay to use an aluminum blacking kit on steel1. The steel must be thoroughly cleaned and scuffed before applying the

Eastwood Metal Blackening System
eastwood.com
1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
GetterDone
Gold Member
Posts: 194
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Restoration of Mark V / produced on 11/84

Post by GetterDone »

A little more progress. :)
Scotch Brite was my friend. :)
pp1.jpg
pp1.jpg (22.34 KiB) Viewed 261 times
Top Side.
pp2.jpg
pp2.jpg (24.84 KiB) Viewed 261 times
Well since the Bluing done So Good. :D
I had to clean and blue the Business end. ;)
pp3.jpg
pp3.jpg (20.64 KiB) Viewed 261 times
Polish then Blue. :)
pp4.jpg
pp4.jpg (20.8 KiB) Viewed 261 times
After does not look to bad for 1st coat.
pp5.jpg
pp5.jpg (28.58 KiB) Viewed 261 times
bottom side 1st coat.
pp6.jpg
pp6.jpg (29.53 KiB) Viewed 261 times
More pictures soon.
I refiled the grooves in this piece.
pp7.jpg
pp7.jpg (21.5 KiB) Viewed 261 times
1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
GetterDone
Gold Member
Posts: 194
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Restoration of Mark V / produced on 11/84

Post by GetterDone »

A little more Progress. :)

I cleaned the handles and Dial for the Quill this evening.

I used an Ultra Sonic cleaner with Pine sol in it.

I filed some of the casting off after the cleaning.

This was this first trip in the Ultrasonic.
h11.jpg
h11.jpg (49.98 KiB) Viewed 196 times
This Is after the second trip to the Bath and some small deburring.
h12.jpg
h12.jpg (64.4 KiB) Viewed 196 times
1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
GetterDone
Gold Member
Posts: 194
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Restoration of Mark V / produced on 11/84

Post by GetterDone »

A little bit more cleaning.

Before the Ultra Sonic cleaner.
s0.jpg
s0.jpg (57.78 KiB) Viewed 166 times
During the cleaning (30 minute Check)


so1.jpg
so1.jpg (64.33 KiB) Viewed 166 times
After 1 hour at about 100 degrees in pine-sol solution.

so2.jpg
so2.jpg (57.17 KiB) Viewed 166 times
1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
GetterDone
Gold Member
Posts: 194
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Restoration of Mark V / produced on 11/84

Post by GetterDone »

A little more cleaning progress.
n7.jpg
n7.jpg (70.68 KiB) Viewed 109 times
n8.jpg
n8.jpg (79.27 KiB) Viewed 109 times
n9.jpg
n9.jpg (51.69 KiB) Viewed 109 times
n10.jpg
n10.jpg (57.2 KiB) Viewed 109 times
1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
User avatar
JPG
Platinum Member
Posts: 35055
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Restoration of Mark V / produced on 11/84

Post by JPG »

Next Evaporust. :cool:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply