quill head bumper
Moderator: admin
quill head bumper
hello to all--i am dave in florida and was gifted a 10er #34419(1950 ???)--am in process of breaking it down to parade rest--one question to start with what type of washer/bumper was used behind the quill head? thanks for any help
-
JPG
- Platinum Member
- Posts: 35399
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: quill head bumper
Rubber
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: quill head bumper
From Shopsmith.com parts
SKU 501307
Price $4.95
Quill Bumper Ring
SKU 501307
Price $4.95
Quill Bumper Ring
-
chapmanruss
- Platinum Member
- Posts: 4153
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: quill head bumper
Dave,
Welcome to the Shopsmith Forum.
The Quill Bumper Ring originally part number 102-53 (after November 1951 P/N A 2291) for the Shopsmith Model 10E and later 10ER is one of the very few parts still used on the Shopsmith Mark tools today. I listed those part numbers for reference to the Model 10 Owner's Guides. As MikeG said it is currently part number 501307.
The other two parts still used today from the original Model 10E and 10ER is the Quill Return Spring and the thinner walled Way Tubes from the late in production 10ER's from 1953. All Model 10E's and earlier Model 10ER's had thicker walled Way Tubes like yours should have.
Welcome to the Shopsmith Forum.
The Quill Bumper Ring originally part number 102-53 (after November 1951 P/N A 2291) for the Shopsmith Model 10E and later 10ER is one of the very few parts still used on the Shopsmith Mark tools today. I listed those part numbers for reference to the Model 10 Owner's Guides. As MikeG said it is currently part number 501307.
The other two parts still used today from the original Model 10E and 10ER is the Quill Return Spring and the thinner walled Way Tubes from the late in production 10ER's from 1953. All Model 10E's and earlier Model 10ER's had thicker walled Way Tubes like yours should have.
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.