Does anyone have pictures of the Greenie lamp?
Moderator: admin
Does anyone have pictures of the Greenie lamp?
I am looking for pictures of the original lamp that attaches to the Greenie. Anyone have anything? Thanks in advance.
Re: Does anyone have pictures of the Greenie lamp?
There was a lamp (rare now) for the Model 10. I have one (actually two). I don't think there was one sold specifically for the Greenie. There was one sold for the MK V long after the Greenie. I have 3 or 4 of them. If I am mistaken someone will correct me. Russ?
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
Re: Does anyone have pictures of the Greenie lamp?
I thought that I saw one in the old Greenie accessory catalog. It had a special mount for the head unit.
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Does anyone have pictures of the Greenie lamp?
Never had one in hand, but IIUC a mounting bracket came with it which allows easy movement from tool to tool (with additional mounting brackets).
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Does anyone have pictures of the Greenie lamp?
Yes, that is the one I mentioned above. You could buy extra machine side brackets for multiple tools. As I remember that came out well beyond the Greenie days. Of course it can be used on a Greenie.JPG wrote: Sat Mar 21, 2026 11:26 am Never had one in hand, but IIUC a mounting bracket came with it which allows easy movement from tool to tool (with additional mounting brackets).
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
Eagle's Lair Woodshop
Hooper, UT
-
chapmanruss
- Platinum Member
- Posts: 4536
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: Does anyone have pictures of the Greenie lamp?
There was a Lamp shown in a 1955 catalog, for example, that was in the Mark 5 section. It was the same lamp for the Model 10's and I have one on my Model A-34 Jig Saw shown below. Sorry I don't have a better picture of it. The Jig Saws both the one for the Model 10's and the later, beginning in 1954, Model 610 Jig Saw for the Mark 5 have a mounting hole for that lamp.
_
.
The Lamp has a washer like ring end for a bolt to attach it to the tool. The end cap of the lamp fixture has the Shopsmith logo on it.
_
.
You can see the mounting hole near the top of the Arm on the Greenie Jig Saw below.
_
.
I have seen other lamps mounted on Shopsmith/Magna tools that were not made by Shopsmith/Magna. Below is a rather famous one.
_
_
- 4E Jointer and Jig Saw.jpg (52.24 KiB) Viewed 11654 times
The Lamp has a washer like ring end for a bolt to attach it to the tool. The end cap of the lamp fixture has the Shopsmith logo on it.
_
- Lamp Mount.JPG (161.32 KiB) Viewed 11651 times
You can see the mounting hole near the top of the Arm on the Greenie Jig Saw below.
_
- Jig Saw 1957 Greenie.jpg (84.21 KiB) Viewed 11654 times
I have seen other lamps mounted on Shopsmith/Magna tools that were not made by Shopsmith/Magna. Below is a rather famous one.
_
- Gibbs Model 10ER.jpg (57.82 KiB) Viewed 11654 times
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Re: Does anyone have pictures of the Greenie lamp?
If you need any additional detailed pictures, I featured a NIB example I acquired a couple of years back in this post:
viewtopic.php?p=315436#p315436
Magna contracted Vimco to make these Shopsmith-branded lights for 10ERs as well as Mark 5s.
viewtopic.php?p=315436#p315436
Magna contracted Vimco to make these Shopsmith-branded lights for 10ERs as well as Mark 5s.
John Dalton
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N R51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1957 Magna-Line Model 710 Bench Saw, S/N 34162 (restored)
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N R51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1957 Magna-Line Model 710 Bench Saw, S/N 34162 (restored)
Re: Does anyone have pictures of the Greenie lamp?
Thank you all for the great replies. This clears things up for me!