I scored a Strip sander (1988 year model) off Craigslist. $50 for the sander AND older jig saw.
The strip sander is missing a few parts. The little wheel just below the upper spring loaded wheel is missing. Also the 3 platens are missing. Kinda surprised the curved one is $25 from SS. Anyone seen a sale lately from Shopsmith? They use to run a parts sale all the time.
Any tips on what to look for in doing my rebuild? The upper spring wheel is kinda stiff but does work.
Looks like the sander was run to the point the belt almost cut the cover in two by the dust port. The cord in the sandpaper was melted into the cover.
Makes you wonder what people does to their tools.
I noticed in the parts view on line it says for sanders prior to 1999. What changed after that date?
Maybe a picture with the cover open so that WE can see what's missing.
cincinnati wrote:I scored a Strip sander (1988 year model) off Craigslist. $50 for the sander AND older jig saw.
The strip sander is missing a few parts. The little wheel just below the upper spring loaded wheel is missing. Also the 3 platens are missing. Kinda surprised the curved one is $25 from SS. Anyone seen a sale lately from Shopsmith? They use to run a parts sale all the time.
Any tips on what to look for in doing my rebuild? The upper spring wheel is kinda stiff but does work.
Looks like the sander was run to the point the belt almost cut the cover in two by the dust port. The cord in the sandpaper was melted into the cover.
Makes you wonder what people does to their tools.
I noticed in the parts view on line it says for sanders prior to 1999. What changed after that date?
cincinnati wrote:I scored a Strip sander (1988 year model) off Craigslist. $50 for the sander AND older jig saw.
The strip sander is missing a few parts. The little wheel just below the upper spring loaded wheel is missing. Also the 3 platens are missing. Kinda surprised the curved one is $25 from SS. Anyone seen a sale lately from Shopsmith? They use to run a parts sale all the time.
Any tips on what to look for in doing my rebuild? The upper spring wheel is kinda stiff but does work.
Looks like the sander was run to the point the belt almost cut the cover in two by the dust port. The cord in the sandpaper was melted into the cover.
Makes you wonder what people does to their tools.
I noticed in the parts view on line it says for sanders prior to 1999. What changed after that date?
Any tips or experience with a rebuild is helpful.
I have encountered two versions. The newer ones have ball bearings and aluminum idler pulleys(2). The older ones had bronze sleeve bearings and plastic idler pulleys. I think the newer ones are preferred but I do not know if the older parts are available.
The 'ball bearing' version pn's are 515390(idler), 515422(bearing), 515409(retaining ring), 515405(1/4-20x1 1/2 cap screw) - from manual 8/93.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Wait a minute, my friend! I Just got my Strip sander a few months ago after a long backorder wait! Mine had brass bushings in plastic idler wheels. In fact, in the first couple hours of operation, I wore out an idler wheel when doing inside sanding.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Mine is dated 2/9/98 and has the metal idler wheels. Never paid attention to the bearings.... the manual that came with it is from 1993 and shows ball bearings. Sorry it is to cold to go check that fact tonight.
Ed
charlese wrote:Wait a minute, my friend! I Just got my Strip sander a few months ago after a long backorder wait! Mine had brass bushings in plastic idler wheels. In fact, in the first couple hours of operation, I wore out an idler wheel when doing inside sanding.
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
cincinnati wrote:Any tips or experience with a rebuild is helpful.
be careful lifting or carrying it by the table.
the trunnion has a thin spot that is delicate compared to most SS stuff.
not sure if I broke it, the teenage son of the previous owner who loaded it into my car (under the 510 maintable), or if it was broke before I ever saw it. I didn't notice it being broken before we took it off the SS in the seller's garage, though.
the replacement part from SS came fairly quickly and was cheap enough that I did not even consider trying to fix the broken one.
Ivan
Mark V (84) w/ jigsaw, belt sander, strip sander
ER10 awaiting restoration
Have to second that issue. Mine came with a cracked part and I had it replaced. I thought it was shipping as the box was beat up but??
Ed
iclark wrote:be careful lifting or carrying it by the table.
the trunnion has a thin spot that is delicate compared to most SS stuff.
not sure if I broke it, the teenage son of the previous owner who loaded it into my car (under the 510 maintable), or if it was broke before I ever saw it. I didn't notice it being broken before we took it off the SS in the seller's garage, though.
the replacement part from SS came fairly quickly and was cheap enough that I did not even consider trying to fix the broken one.
Ivan
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
charlese wrote:Wait a minute, my friend! I Just got my Strip sander a few months ago after a long backorder wait! Mine had brass bushings in plastic idler wheels. In fact, in the first couple hours of operation, I wore out an idler wheel when doing inside sanding.
I tore into my sander tonight. A 4" wood screw fell out of the top wheel housing The spring was broken but 65 cents later at Sears Hardware and was ready to go.
My idler wheels are metal (heavy at that) and the have German made bearings:D Was going to order new ones but not if I am going to receive plastic with bushings. Any other new strip sander owners, What type wheel are in your unit?
cincinnati wrote:I tore into my sander tonight. A 4" wood screw fell out of the top wheel housing The spring was broken but 65 cents later at Sears Hardware and was ready to go.
My idler wheels are metal (heavy at that) and the have German made bearings:D Was going to order new ones but not if I am going to receive plastic with bushings. Any other new strip sander owners, What type wheel are in your unit?
I think the metal ones are the newer(current) type. I would get an 'extra' one and mount it at the upper location. That way you do not need to move it to switch between in and outside edge sanding.
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
JPG40504 wrote:I think the metal ones are the newer(current) type. I would get an 'extra' one and mount it at the upper location. That way you do not need to move it to switch between in and outside edge sanding.
Hmmmm! This is the second time you've said that. With reference to my earlier post (#3) - - I got my Strip Sander on SEPT 4th of 2009. THAT IS THIS YEAR!!! AND THAT'S PRETTY CURRENT!!! The idler wheels are plastic!! Also, I have worn out one of the idler wheels and got a replacement (also in SEPT. 2009) IT IS ALSO PLASTIC!
BTW My Strip Sander was on Backorder for approximately 8 months, so I honestly believe the one I got is the current type. IT HAS PLASTIC IDLER WHEELS!
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
The spring was broken but 65 cents later at Sears Hardware and was ready to go.