Server not found AGAIN...
Moderator: admin
- Ed in Tampa
- Platinum Member
- Posts: 5834
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
In the last 8 hours give or take a few minutes I have been here 40 times and not a single problem. I'd keep going but its late...
What ever paths I have in the network to shopsmith they are not seeing any major problems.
[ATTACH]8185[/ATTACH]
Ed
What ever paths I have in the network to shopsmith they are not seeing any major problems.
[ATTACH]8185[/ATTACH]
Ed
- Attachments
-
- ScreenHunter_003.jpg (49.03 KiB) Viewed 2503 times
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
Ed I think you are bragging. Yes like others I envy you. Many of us appear to lack your touch for getting into the discussion group. My resident IT expert spent two hours last evening trouble shooting our computer system. Our issue is not on this end. The problem is originating somewhere else. Jimreible wrote:In the last 8 hours give or take a few minutes I have been here 40 times and not a single problem. I'd keep going but its late...
What ever paths I have in the network to shopsmith they are not seeing any major problems.
[ATTACH]8185[/ATTACH]
Ed
F. Jim Parks
Lakewood, Colorado:)
When the love of power is replaced by the power of love the world will have a chance for survival.
Lakewood, Colorado:)
When the love of power is replaced by the power of love the world will have a chance for survival.
The intent is not to brag but since some have been pointing fingers at shopsmith then we should all have seen problems... not the case.fjimp wrote:Ed I think you are bragging. Yes like others I envy you. Many of us appear to lack your touch for getting into the discussion group. My resident IT expert spent two hours last evening trouble shooting our computer system. Our issue is not on this end. The problem is originating somewhere else. Jim
From what I can see it is a network error... it would be interesting to know if it is all coming from the same server/router/switch or if it is more wide spread problem.
Of course some people (not you Jim) may have local issues that they are also dealing with which makes this even worse for them.
For any of you who have been trying the google dns servers, I've abandon that for now. I still get better performance from my local isp dns servers. For those who might want to experiment you can read about it here:
http://code.google.com/speed/public-dns/docs/using.html
If you would like to see how your name server is doing you might want to try this:
http://www.grc.com/dns/benchmark.htm
If you would like to run a graphical trace route pick the free one at:
http://www.visualroute.com/
I have personal used these and what I have installed on my computer... this is not to say that there might be better ones or more complete ones but for my budget of $0 they are just fine.
So having said all that I'll not continue posting my results unless they start going down hill and feel like complaining.
Ed
{Knight of the Shopsmith} [Hero's don't wear capes, they wear dog tags]
- dusty
- Platinum Member
- Posts: 21530
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
Server Not Found AGAIN
Yes, Visualware is a very good program to deal with what we are discussing. As Ed has pointed out, there are more powerful tools available but they come with a price tag. This free package works well for the non-commercial user.
Following are two traces of the shopsmith.net link; one shows a functional link and the other an inoperative link.
Note that the big difference between the two is that one shows NO LINK thru the firewall into 24.173.75.51 while the other (Good Link) does not depict the firewall and the packets reach 24.173.75.51. I may be wrong but I believe this indicates that when a problem exists on my link to shopsmith that the problem is within the shopsmith server. The rest of the link behaves normally.
I have been in contact with the webmaster and they are working on the problem.
"Patience, Grasshopper. It will be fixed".
Following are two traces of the shopsmith.net link; one shows a functional link and the other an inoperative link.
Note that the big difference between the two is that one shows NO LINK thru the firewall into 24.173.75.51 while the other (Good Link) does not depict the firewall and the packets reach 24.173.75.51. I may be wrong but I believe this indicates that when a problem exists on my link to shopsmith that the problem is within the shopsmith server. The rest of the link behaves normally.
I have been in contact with the webmaster and they are working on the problem.
"Patience, Grasshopper. It will be fixed".
- Attachments
-
- 3242010 0847 BAD (Medium) (Custom) (Small).jpg (53.52 KiB) Viewed 2416 times
-
- 3242010 1417 GOOD (Medium) (Small).jpg (45.51 KiB) Viewed 2409 times
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
Wow... I have gotten on 3 times out 5 attempts this evening...
I'm sure Shopsmith is doing all they can to find the bottleneck and as long as I can get through now and then I'll survive.
I'm sure Shopsmith is doing all they can to find the bottleneck and as long as I can get through now and then I'll survive.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
You know, when I try and can't get on the site I get this image in my mind of Humphrey Bogart laying on the floor of The African Queen on his back in a hail of gunfire, kicking the boiler... 
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
And where is Kathrine while you are doing this?robinson46176 wrote:You know, when I try and can't get on the site I get this image in my mind of Humphrey Bogart laying on the floor of The African Queen on his back in a hail of gunfire, kicking the boiler...
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange