Dead tailstock adaptor
Moderator: admin
Dead tailstock adaptor
I have a 4 jaw chuck that I want to addapt to the tailstock. I willbe boring through 2" square stock to make fishing rod handles The chuch has 1"x8 tpi and 3/4"x16 tpi. What do I need to addapt this chuck to the #2MT in the Tail stock. I have a 1/2" drill chuck with a #2 MT.Is there a 1x8tpi or a3/4"x16tpi with a #2 MT dead center? I found one with a live center. Or is there a addaptor for 1"x8tpi or 3/4"x16 tpi that would fit in the 1/2" drill chuck? thanks for any replys. Keith
Is this what your looking for?
http://www.shopsmith.com/ownersite/catalog/l_lathearbors.htm
http://www.shopsmith.com/ownersite/catalog/l_lathearbors.htm
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob