Is this a good deal?
My local Habitat store has a used 510 that looks to be in hardly used shape. There are no accessories, miter or rip fence. Just the tables and tubes. The speed control does almost nothing, but it does run. I currently have a 35 year old 500 that Jacob Anderson refurbished for me last year that I use almost every day.
Used '94 510 $300
Moderator: admin
This is an excellant buy if you have room for a second Shopsmith. There are on-line videos available that covers the rebuilding of the headstock if you desire to rebuild the headstock yourself. Any questions will be quickly answered on this forum. Let us know if you buy this Shopsmith otherwise clue us in as where it is located. Thanks.
Bill Mayo bill.mayo@verizon.net
Shopsmith owner since 73. Sell, repair and rebuild Shopsmith, Total Shop & Wood Master headstocks, SPTs, attachments, accessories and parts. US Navy 1955-1975 (FTCS/E-8)
Shopsmith owner since 73. Sell, repair and rebuild Shopsmith, Total Shop & Wood Master headstocks, SPTs, attachments, accessories and parts. US Navy 1955-1975 (FTCS/E-8)
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
A 510 rip fence is easily obtained. They are on EB often. The 500 miter gauge will work with the 510 table.
If the motor runs, that eliminates the major concern. I be curious how rotating the speed control dial 'feels'. I was looking at one a while back and it was basically running at slow speed, but would sloooowly increase speed. It turned fairly easily until it reached a slow setting. I concluded that the floating sheave was sticking and purchased it anyway.
If the rust is minimal or otherwise acceptable and no aluminum castings are broken/cracked, IMHO get it b4 someone else does.
P.S. IF it is near KY, and you decide to 'let it pass', PM me prior to telling anyone else!!!!!!:rolleyes:
If the motor runs, that eliminates the major concern. I be curious how rotating the speed control dial 'feels'. I was looking at one a while back and it was basically running at slow speed, but would sloooowly increase speed. It turned fairly easily until it reached a slow setting. I concluded that the floating sheave was sticking and purchased it anyway.
If the rust is minimal or otherwise acceptable and no aluminum castings are broken/cracked, IMHO get it b4 someone else does.
P.S. IF it is near KY, and you decide to 'let it pass', PM me prior to telling anyone else!!!!!!:rolleyes:
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
-
joe_marsha11
- Bronze Member
- Posts: 6
- Joined: Thu Aug 19, 2010 7:27 pm
Good catch. There is a 1990something 510 in my local pawnshop for $1,500, "down" from $1,800 with no accessories.joe_marsha11 wrote:Thanks for the insight and encouragement guys! The Lawrenceville (Atlanta), GA Habitat store manager put a sold tag on it with my name and I'll pay for it when I cash in some projects and get a paycheck. I hope to win ebay bids on a miter and a rip fence in the next 3 hours.
-
joe_marsha11
- Bronze Member
- Posts: 6
- Joined: Thu Aug 19, 2010 7:27 pm
Used model 510
OK, $65 including shipping for a rip fence and miter on ebay!joe_marsha11 wrote:Thanks for the insight and encouragement guys! The Lawrenceville (Atlanta), GA Habitat store manager put a sold tag on it with my name and I'll pay for it when I cash in some projects and get a paycheck. I hope to win ebay bids on a miter and a rip fence in the next 3 hours.
The speed control on the 510 can be rotated continuously without stopping anywhere. The speed stays constant except for one spot where it speeds up a little and then returns to its previous steady speed.
I hope it's just a loose belt.
Where on this forum site are there instructions for fixing this?
I also have Jacob Anderson's Shopsmith Repair DVD's but don't know where the info on this would be. Unless someone here knows, I'll send Jacob an email query.
Thanks for all the help!
-
JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
joe_marsha11 wrote:OK, $65 including shipping for a rip fence and miter on ebay!
The speed control on the 510 can be rotated continuously without stopping anywhere. The speed stays constant except for one spot where it speeds up a little and then returns to its previous steady speed.
I hope it's just a loose belt.
Where on this forum site are there instructions for fixing this?
I also have Jacob Anderson's Shopsmith Repair DVD's but don't know where the info on this would be. Unless someone here knows, I'll send Jacob an email query.
Thanks for all the help!
Start with 'Reborn' sessions 21-24 here
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Sounds like ya need to find out what part needs replacing, in the speed control.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
.
.
Bob