I have extra SS 500 pieces, Do you want them?

Forum for Maintenance and Repair topics. Feel free to ask questions or contribute.

Moderator: admin

Post Reply
spiderclimber
Gold Member
Posts: 218
Joined: Wed Mar 23, 2011 9:19 am
Location: Olmsted Falls Ohio

Post by spiderclimber »

Ok Underdog replied and needs the fence / table but not the carriage. So Wingrider will get the carriage. I need a PM from you with your address so I can get the shipping figured out and sent this weekend.

Apologies to Ron and JPG for not being able to get the parts to you. I unfortunately only have one set to give away.
Top
User avatar
JPG
Platinum Member
Posts: 35457
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

spiderclimber wrote:Ok Underdog replied and needs the fence / table but not the carriage. So Wingrider will get the carriage. I need a PM from you with your address so I can get the shipping figured out and sent this weekend.

Apologies to Ron and JPG for not being able to get the parts to you. I unfortunately only have one set to give away.
Not necessary!!!!!:)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
User avatar
wannabewoodworker
Platinum Member
Posts: 626
Joined: Mon Feb 15, 2010 11:36 am
Location: Milford, CT

Post by wannabewoodworker »

Gat is going to pass on my guards for now. I really did not like the metal guards when I installed them and told him that. They (upper) just didn't move very smoothly or easily when it was installed. I also got the retrofit guards from a 510 I assume with the plastic pieces and this guard assembly works much better than the metal ones. The metal ones do perform a safety function just don't work very nicely in my opinion. They are still available to anyone who may want them. I think I have one lower and a couple of uppers.

The thing that really sucks about even the newer guard is that you cannot use anything else with them installed. I have to remove the upper guard to use the machine in any other mode which really sucks. I cannot tilt the table for drill press operations with the plastic upper blade guard mount installed on the trunnion...........:mad:
Michael Mayo
Senior IT Support Engineer
Soft Designs Inc.
albiemanmike@gmail.com
1960's SS Mark VII, 1954 Greenie, 1983 Mark V, Jointer, Bandsaw, Jigsaw, Dewalt Slider, Delta Super 10, Delta 8" Grinder, Craftsman compressor, Drill Doctor, Kreg PH Jig, Bosch Jigsaw, Craftsman Router and Table...........and adding more all the time....:D
Top
spiderclimber
Gold Member
Posts: 218
Joined: Wed Mar 23, 2011 9:19 am
Location: Olmsted Falls Ohio

Post by spiderclimber »

I got a reply from Pessen that he actually found his upper and lower guard. He bought a machine recently and didn't think it had them but it does. So the guards are still available on mine as well.

So if you need an upper or lower guard that is metal, not plastic, let me know.
Top
spiderclimber
Gold Member
Posts: 218
Joined: Wed Mar 23, 2011 9:19 am
Location: Olmsted Falls Ohio

Post by spiderclimber »

Ok forum members that are getting items from me, I want to apologize and say I did not get them mailed this weekend. I ended up getting to drive for 6 hours, pick up 2500 pounds of cobblestones and bring them home. Then I got to put 7 yards of mulch into our flowerbeds and around our trees. The house looks nice but the items got put to the back burner for the wife. I will get them sent in the next day or so hopefully.

Sorry about the delay.

Alan
Top
User avatar
beeg
Platinum Member
Posts: 4791
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

OH SURE. Take care of the WIFE first huh. THEN the poor guys here waiting for their goodies. :D
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.
Bob
Top
spiderclimber
Gold Member
Posts: 218
Joined: Wed Mar 23, 2011 9:19 am
Location: Olmsted Falls Ohio

Post by spiderclimber »

beeg wrote:OH SURE. Take care of the WIFE first huh. THEN the poor guys here waiting for their goodies. :D

You know Red Green had a saying that comes to mind. "If your wife's having fun and you're not, you're still having way more fun than when you're having fun and she's not."

I find it better to keep the wife happy than not :)
Top
User avatar
joedw00
Platinum Member
Posts: 1957
Joined: Thu Jul 20, 2006 7:01 pm
Location: Wichita, Kansas

Post by joedw00 »

Another saying: If Mama ain't nobody is happy!!
Joe

520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500

Being a VETERAN is an honor
Being a GRANDPA is priceless
Top
User avatar
wingrider
Gold Member
Posts: 58
Joined: Tue May 04, 2010 11:39 pm
Location: Kingston, IL

Post by wingrider »

spiderclimber wrote:Ok forum members that are getting items from me, I want to apologize and say I did not get them mailed this weekend. I ended up getting to drive for 6 hours, pick up 2500 pounds of cobblestones and bring them home. Then I got to put 7 yards of mulch into our flowerbeds and around our trees. The house looks nice but the items got put to the back burner for the wife. I will get them sent in the next day or so hopefully.

Sorry about the delay.

Alan
No need to apologize. Like some of the others have said, If the wife isn't happy nobody's happy. :D
Top
User avatar
JPG
Platinum Member
Posts: 35457
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

joedw00 wrote:Another saying: If Mama ain't nobody is happy!!
And There is where SWMBO originates!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
Post Reply

Return to “Maintenance and Repair”