Woodcraft offering franchises
Moderator: admin
If you read the ad you need $350,000.00 up front to order to get started. When the store here went out of business, I don't understand why Woodcraft corporate offices let such a thing happen. I'm sure they have their reasons, but there are stores owned by Woodcraft outright. THey could have let the operation go on until a suitable investor/buyer stepped into the picture.
BPR
BPR
The local Woodcraft here in Dublin, CA was up for sale a while back- don't know if a buyer was found or not.
A year or so again, a big sign went up in their front window, saying "shoplifters will be prosecuted", or words to that effect. I asked the owner about it, and he said that shoplifters were putting a major hole in his finances. I guess I'm not surprised- there are hundreds of small items that could easily be put in a pocket, and tall displays separating the aisles so that it is difficult for the few employees to keep a close eye on the merchandise. Sad that a few dishonest people can spoil things for everyone else.
Maybe they should change the sign to say that shoplifters will be used in the next Sawstop demo....
Gary
A year or so again, a big sign went up in their front window, saying "shoplifters will be prosecuted", or words to that effect. I asked the owner about it, and he said that shoplifters were putting a major hole in his finances. I guess I'm not surprised- there are hundreds of small items that could easily be put in a pocket, and tall displays separating the aisles so that it is difficult for the few employees to keep a close eye on the merchandise. Sad that a few dishonest people can spoil things for everyone else.
Maybe they should change the sign to say that shoplifters will be used in the next Sawstop demo....
Gary
- JPG
- Platinum Member
- Posts: 35600
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
greitz wrote:The local Woodcraft here in Dublin, CA was up for sale a while back- don't know if a buyer was found or not.
A year or so again, a big sign went up in their front window, saying "shoplifters will be prosecuted", or words to that effect. I asked the owner about it, and he said that shoplifters were putting a major hole in his finances. I guess I'm not surprised- there are hundreds of small items that could easily be put in a pocket, and tall displays separating the aisles so that it is difficult for the few employees to keep a close eye on the merchandise. Sad that a few dishonest people can spoil things for everyone else.
Maybe they should change the sign to say that shoplifters will be used in the next Sawstop demo....
Gary
Finger, or ??????:D
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
- cincinnati
- Platinum Member
- Posts: 1172
- Joined: Sun Apr 15, 2007 6:40 pm
- Location: Cincinnati, Ohio
If you have never worked in a store you have no idea how bad theft is. It is just part of doing business. Theft for a big box store, you could buy a house in less than two years with the amount taken.greitz wrote:The local Woodcraft here in Dublin, CA was up for sale a while back- don't know if a buyer was found or not.
A year or so again, a big sign went up in their front window, saying "shoplifters will be prosecuted", or words to that effect. I asked the owner about it, and he said that shoplifters were putting a major hole in his finances. I guess I'm not surprised- there are hundreds of small items that could easily be put in a pocket, and tall displays separating the aisles so that it is difficult for the few employees to keep a close eye on the merchandise. Sad that a few dishonest people can spoil things for everyone else.
Maybe they should change the sign to say that shoplifters will be used in the next Sawstop demo....
Gary
After working over 20 years in retail I could take you into any big box store, in less than an hours time I bet I could show you someone shoplifting.
Bad part is not only do they take stuff from you but then try and return it for $$$.
"Prove to all the world Metal rules the land"
-Judas Priest, Heavy Duty.
-Judas Priest, Heavy Duty.
-
swampgator
- Platinum Member
- Posts: 1256
- Joined: Fri Nov 27, 2009 9:32 pm
- Location: Pensacola, FL
Nearest Woodcraft for those of us along the Gulf Coast is at least 4 hours away just south of Birmingham, AL. Don't have any plans to take me that direction. And, when I travel, have to make room for wife's motorized wheelchair and all that paranalia. We do have an independent wood dealer in the area. Don't know how to compare the prices, but he has built a large warehouse of his own with various pieces and sizes of a variety of woods. He is only open on the weekends and in the evenings.
Correction to my original post, I am restricted by law as a Federal retiree. I get penalized for working after my civil service retirement, but would love to have a business like this.
If I had small items in the store, they would all be moved to the area near the check out so you could keep an eye on them. Better, would be to put such in glass cabinets like K-Mart used to do. Yes, it would take time, but you have to loose either to the thief or to time. I would choose time.
Correction to my original post, I am restricted by law as a Federal retiree. I get penalized for working after my civil service retirement, but would love to have a business like this.
If I had small items in the store, they would all be moved to the area near the check out so you could keep an eye on them. Better, would be to put such in glass cabinets like K-Mart used to do. Yes, it would take time, but you have to loose either to the thief or to time. I would choose time.
Steve, the old Florida gator
I just love it when she says I can go make sawdust.

I just love it when she says I can go make sawdust.
[quote="swampgator"]Nearest Woodcraft for those of us along the Gulf Coast is at least 4 hours away just south of Birmingham, AL. Don't have any plans to take me that direction. And, when I travel, have to make room for wife's motorized wheelchair and all that paranalia. We do have an independent wood dealer in the area. Don't know how to compare the prices, but he has built a large warehouse of his own with various pieces and sizes of a variety of woods. He is only open on the weekends and in the evenings.
Correction to my original post, I am restricted by law as a Federal retiree. I get penalized for working after my civil service retirement, but would love to have a business like this.
If I had small items in the store, they would all be moved to the area near the check out so you could keep an eye on them. Better, would be to put such in glass cabinets like K-Mart used to do. Yes, it would take time, but you have to loose either to the thief or to time. I would choose time. ]
Have you checked out the woodworking store in pensacola? My in-laws live down there, and when I looked there was a place right near the catholic high school. Black river woodworks perhaps?
Correction to my original post, I am restricted by law as a Federal retiree. I get penalized for working after my civil service retirement, but would love to have a business like this.
If I had small items in the store, they would all be moved to the area near the check out so you could keep an eye on them. Better, would be to put such in glass cabinets like K-Mart used to do. Yes, it would take time, but you have to loose either to the thief or to time. I would choose time. ]
Have you checked out the woodworking store in pensacola? My in-laws live down there, and when I looked there was a place right near the catholic high school. Black river woodworks perhaps?
Mark 7, Pro Planer, Jointer, Bandsaw w/Kreg, Biscuit Joiner, Belt Sander, Jig Saw, Ringmaster, DC3300, Overarm Pin Router, Incra Ultimate setup
JWBS-14 w/6" riser, RBI Hawk 226 Ultra, Bosch GSM12SD Axial Glide Dual Compound Miter Saw
-- I have parts/SPTs available, so if you are in the Seattle area and need something let me know --
damagi AT gmail DOT com
JWBS-14 w/6" riser, RBI Hawk 226 Ultra, Bosch GSM12SD Axial Glide Dual Compound Miter Saw
-- I have parts/SPTs available, so if you are in the Seattle area and need something let me know --
damagi AT gmail DOT com
- trainguytom
- Gold Member
- Posts: 324
- Joined: Sat Feb 10, 2007 7:22 pm
- Location: Central WI
Following your dream
I know it seems like a slam-dunk for many woodworkers to open a woodworking supply store because we love it & would go there & therefore believe it would work since there might not be another outlet in the area, but all those factors don't insure success.
I know that some franchisors actually prefer not to have their owners be deeply involved in the area that the franchise serves. It can remove objectivity when doing preliminary business projections. The love of that subject can skew judgement. When diving into a business, it's better to look only at numbers & stats that relate to the local demographics, economy, etc. (Yes, I understand that it's great to love what you do, but you have to succeed at the purely business side of things to make a living at it) Franchises, especially retail ones that cater to limited segments of the general population, can be an extremely difficult go.
I guess all I'm saying is the love of something is not enough to make it succeed, and success is the real goal.
I know that some franchisors actually prefer not to have their owners be deeply involved in the area that the franchise serves. It can remove objectivity when doing preliminary business projections. The love of that subject can skew judgement. When diving into a business, it's better to look only at numbers & stats that relate to the local demographics, economy, etc. (Yes, I understand that it's great to love what you do, but you have to succeed at the purely business side of things to make a living at it) Franchises, especially retail ones that cater to limited segments of the general population, can be an extremely difficult go.
I guess all I'm saying is the love of something is not enough to make it succeed, and success is the real goal.
My dad's 1951 10er, 2 more 10er's, same vintage, a Goldie MK5, a 510 shortie with 34inch tubes, bandsaw, jointer, jigsaw, belt sander, a ton of small SS goodies and still looking...you just can't have enough Shopsmith stuff
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
trainguytom wrote:I know it seems like a slam-dunk for many woodworkers to open a woodworking supply store because we love it & would go there & therefore believe it would work since there might not be another outlet in the area, but all those factors don't insure success.
I know that some franchisors actually prefer not to have their owners be deeply involved in the area that the franchise serves. It can remove objectivity when doing preliminary business projections. The love of that subject can skew judgement. When diving into a business, it's better to look only at numbers & stats that relate to the local demographics, economy, etc. (Yes, I understand that it's great to love what you do, but you have to succeed at the purely business side of things to make a living at it) Franchises, especially retail ones that cater to limited segments of the general population, can be an extremely difficult go.
I guess all I'm saying is the love of something is not enough to make it succeed, and success is the real goal.
Yep...
.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
-
swampgator
- Platinum Member
- Posts: 1256
- Joined: Fri Nov 27, 2009 9:32 pm
- Location: Pensacola, FL
Totally agreed that our fantasy dreams will not ensure success. But, to dream is to consider the angles to see if it is a possibility.
Yes, Black Water River Tools over near the Catholic School is here. It is small and items and selection is limited. Good products, though. And, they really don't like Shopsmiths.
Yes, Black Water River Tools over near the Catholic School is here. It is small and items and selection is limited. Good products, though. And, they really don't like Shopsmiths.
Steve, the old Florida gator
I just love it when she says I can go make sawdust.

I just love it when she says I can go make sawdust.