Chain Saw Recommendations

Create a review for a woodworking tool that you are familiar with (Shopsmith brand or Non-Shopsmith) or just post your opinion on a specific tool. Head to head comparisons welcome too.

Moderator: admin

User avatar
algale
Platinum Member
Posts: 4827
Joined: Thu Nov 04, 2010 8:13 am

Post by algale »

It should be pointed out you can mix and match somewhat. I run a Husquevarna Rancher 455 with a 20 inch Husquevarna bar and replaced the chain with a Stihl full chip chain! The Stihl chain is pre-stretched and I think it makes a difference. During break-in you won't need to re-tension as often or as much.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!

User avatar
terrydowning
Platinum Member
Posts: 1678
Joined: Mon Jul 19, 2010 3:26 pm
Location: Windsor, CO

Post by terrydowning »

Find a friend that likes using his chainsaw.

Keep in mind how much cutting you will actually be doing.

I have several handsaws that meet my needs for now. Not as fast but they are on hand, and I find I get less injured than a higher speed tool like a chainsaw. It's also a great upper body workout.

Next will probably be an electric chainsaw. I don't want to deal with 2 cycle engines and all the hassle that comes along with those. I'm not felling trees or bringing in cords of wood. Just trimming what I can get from the local tree professionals.

Just a different point of view.
--
Terry
Copy and paste the URLs into your browser if you want to see the photos.

1955 Shopsmith Mark 5 S/N 296860 Workshop and Tools
https://1drv.ms/i/s!AmpX5k8IhN7ahFCo9VvTDsCpoV_g

Public Photos of Projects
http://sdrv.ms/MaXNLX
User avatar
fredsheldon
Platinum Member
Posts: 1175
Joined: Tue Jan 17, 2012 1:31 pm
Location: The Woodlands, Texas

Post by fredsheldon »

I want to thank everyone who has provided feedback and advice. There happens to be an ACE Hardware store across the street from where I work and I just paid them a visit. I am now the owner of a MS 290 18" STIHL FARM BOSS. I had them swap out the regular chain for a more aggressive one since I will be ripping logs lengthwise to prepare blanks for wood bowls. I have a friend that has lots of oak that have fallen due to a severe drought last year and a storm with high winds last week. He will be providing me with all the oak logs I want so I will be putting the Stihl to the test for sure. I will be paying the local Woodmaster store a visit tonight to pick up some Green Wood End Sealer to prevent the logs from checking until I can get to them. Now the fun starts ( I hope :D ).
Fred Sheldon
The Woodlands, Tx
'52 10ER # 60869 (restored in 2012, used as a dedicated drill press), '52 10ER # 88712 (restored 01/2013), 52 10ER # 71368 (in process of restoring), '83 500 Shorty with OPR installed, '83 520 PowerPro with Lift Assist, 6" Joiner, 6" Belt Sander, 18" Jig Saw, 11" Band Saw, 12" ProPlaner, SS Crosscut Table. SS Dust Collector, Hitachi 1/2" router, Work Sharp 3000 with all attachement, Nova G3 Chuck, Universal Tool Rest, Appalachia Tool Works Sled.
dforeman
Gold Member
Posts: 231
Joined: Thu Nov 19, 2009 1:28 pm
Location: Westminster, Maryland

Post by dforeman »

I think you will be happy with your purchase. Stihl saws are more expensive than the typical chainsaw brands on the market but the service you get out of it will more than make up for the extra cost. Just make sure to do the recommended maintenance, keep the chain sharpened and it will last you a lifetime.

Ooooo. And if you have any doubts about proper usage, please do consider a safety course or some sort of training. Chainsaws are very aggressive dangerous tools. You absolutely do not want to take them for granted.
User avatar
JPG
Platinum Member
Posts: 35430
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

Watch Texas chain saw massacre etc. and you will gain an appreciation for how dangerous they can be when pitted against one self.:eek:
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
algale
Platinum Member
Posts: 4827
Joined: Thu Nov 04, 2010 8:13 am

Post by algale »

Chain saw chaps are a good investment.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!

User avatar
dusty
Platinum Member
Posts: 21481
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

algale wrote:Chain saw chaps are a good investment.
I have a toy in comparison to what is being discussed here but I could not complete my yard work without my cheap chain saw and I would not use a good chain saw to do what I have to do.

I am clearing my property, one prickley pear cactus at a time, using my small, cheap Sears chain saw. If works great but when I am done I will probably have turned it into scrap.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
algale
Platinum Member
Posts: 4827
Joined: Thu Nov 04, 2010 8:13 am

Post by algale »

dusty wrote:I have a toy in comparison to what is being discussed here but I could not complete my yard work without my cheap chain saw and I would not use a good chain saw to do what I have to do.

I am clearing my property, one prickley pear cactus at a time, using my small, cheap Sears chain saw. If works great but when I am done I will probably have turned it into scrap.
Before buying the Husquevarna, I used to have a "cheap" Sears chain saw. It lasted almost 12 years before died. In retrospect it was a good investment. But I was referring to chain saw "chaps." http://www.stihlusa.com/products/protec ... /blkchaps/
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!

User avatar
dusty
Platinum Member
Posts: 21481
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Post by dusty »

algale wrote:Before buying the Husquevarna, I used to have a "cheap" Sears chain saw. It lasted almost 12 years before died. In retrospect it was a good investment. But I was referring to chain saw "chaps." http://www.stihlusa.com/products/protective-and-work-wear/chain-saw-protective-apparel/blkchaps/
Very clearly you were. I should have read, shouldn't I have? My BAD.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
marballizer1
Silver Member
Posts: 8
Joined: Wed Sep 05, 2012 1:06 pm
Location: New Braunfels Texas.

Post by marballizer1 »

I guess this is a little to big for what you are using it for. :D

V8 powered chainsaw
Alex in New Braunfels Texas.
Post Reply