That looks easy enough.BuckeyeDennis wrote:Guys, I can sympathize. As a relatively young pup at age 56, you would think that getting up from the floor wouldn't be a big deal for me. But while I'm still pretty robust from the thighs up, I inherited my Mom's prematurely arthritic knees. They work OK on level ground, but they sound mighty like a ratchet whenever I walk downstairs. No way that I can sneak up on my kids anymore.
Fortunately, my mind is still sharp, and my early training in physics and robotics enabled me to invent a move for rising from a completely supine position, to fully erect, in almost no time .. while never applying a significant non-columnar load to my knees. I call it the "kip-up". You can check out my technique out in this video, in which one of my acolytes demonstrates the move for the benefit of the next generation.
You may want to practice the maneuver on a thick padded carpet, before attempting it on your workroom floor.
getting older
Moderators: HopefulSSer, admin
Joe
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
520, Bandsaw, Beltsander, Delta Drill Press, Delta Lathe, Craftsman Planner/Jointer, Delta Planner, Mini "Greenie" Shorty 500
Being a VETERAN is an honor
Being a GRANDPA is priceless
- ChrisNeilan
- Platinum Member
- Posts: 1462
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact:
BuckeyeDennis wrote:Guys, I can sympathize. As a relatively young pup at age 56, you would think that getting up from the floor wouldn't be a big deal for me. But while I'm still pretty robust from the thighs up, I inherited my Mom's prematurely arthritic knees. They work OK on level ground, but they sound mighty like a ratchet whenever I walk downstairs. No way that I can sneak up on my kids anymore.
Fortunately, my mind is still sharp, and my early training in physics and robotics enabled me to invent a move for rising from a completely supine position, to fully erect, in almost no time .. while never applying a significant non-columnar load to my knees. I call it the "kip-up". You can check out my technique out in this video, in which one of my acolytes demonstrates the move for the benefit of the next generation.
You may want to practice the maneuver on a thick padded carpet, before attempting it on your workroom floor.
I can do that, but I find it's easier to do a backward handspring to your feet. I was blessed with gymnastic abilities, finely honed while playing right field in little league! When I turned fifty five years ago, I marked the date with five flips, nailed four of them... six for sixty?
Chris Neilan
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
Shopsmith Mark 7, Shopsmith Mark V 1982, shortened, Shopsmith 10 ER; Craftsman table saw (1964); Powermatic 3520B lathe
- shipwright
- Platinum Member
- Posts: 1160
- Joined: Tue Dec 15, 2009 7:28 pm
- Location: Vancouver Island, Canada
- Contact:
A little motivation can be of help sometimes I find. For instance, if you drop a screw ..... it's hardly worth the trouble.
...... but if you toss say your last beer down there with it, then it's worth going to the trouble. There's an old joke about a two holer outdoor toilet........
:-)
...... but if you toss say your last beer down there with it, then it's worth going to the trouble. There's an old joke about a two holer outdoor toilet........
:-)
Paul M ........ The early bird gets the worm but the second mouse gets the cheese
- robinson46176
- Platinum Member
- Posts: 4182
- Joined: Mon Mar 09, 2009 9:00 pm
- Location: Central Indiana (Shelbyville)
BTW, I find that gluing a good button shaped magnet to the base of a hammer handle stops a lot of the noises of picking up a screw or nail...
.
.
--
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
farmer
Francis Robinson
I did not equip with Shopsmiths in spite of the setups but because of them.
1 1988 - Mark V 510 (bought new), 4 Poly vee 1 1/8th HP Mark V's, Mark VII, 1 Mark V Mini, 1 Frankensmith, 1 10-ER, 1 Mark V Push-me-Pull-me Drillpress, SS bandsaw, belt sander, jointer, jigsaw, shaper attach, mortising attach, TS-3650 Rigid tablesaw, RAS, 6" long bed jointer, Foley/Belsaw Planer/molder/ripsaw, 1" sander, oscillating spindle/belt sander, Scroll saw, Woodmizer sawmill
- Ed in Tampa
- Platinum Member
- Posts: 5832
- Joined: Fri Jul 21, 2006 12:45 am
- Location: North Tampa Bay area Florida
BuckeyeDennis wrote:Guys, I can sympathize. As a relatively young pup at age 56, you would think that getting up from the floor wouldn't be a big deal for me. But while I'm still pretty robust from the thighs up, I inherited my Mom's prematurely arthritic knees. They work OK on level ground, but they sound mighty like a ratchet whenever I walk downstairs. No way that I can sneak up on my kids anymore.
Fortunately, my mind is still sharp, and my early training in physics and robotics enabled me to invent a move for rising from a completely supine position, to fully erect, in almost no time .. while never applying a significant non-columnar load to my knees. I call it the "kip-up". You can check out my technique out in this video, in which one of my acolytes demonstrates the move for the benefit of the next generation.
You may want to practice the maneuver on a thick padded carpet, before attempting it on your workroom floor.
Hey thanks Dennis this was just what I needed. The wife was after me to paint the house, so I dropped the paint brush on the floor and laid down beside it to pick it up. Then I did just like the video showed. It worked!!!
Wife said the painters will be finished with the house about the time I get out of the hospital.
Ed in Tampa
Stay out of trouble!
Stay out of trouble!
- BuckeyeDennis
- Platinum Member
- Posts: 3701
- Joined: Tue Jul 24, 2012 10:03 pm
- Location: Central Ohio
Ed, you the man! You must have snuck back up here to Ohio and got yourself a good bellyfull of gravy-fried, hickory-fed squirrel to have pulled off that stunt! Don't worry about the hospital thing .. those poor starving docs need all the charity business that we can afford them.Ed in Tampa wrote:Hey thanks Dennis this was just what I needed. The wife was after me to paint the house, so I dropped the paint brush on the floor and laid down beside it to pick it up. Then I did just like the video showed. It worked!!!
Wife said the painters will be finished with the house about the time I get out of the hospital.
ChrisNeilan may be younger and more acrobatic, but he is just not as kind and generous to them young whippersnapper docs as you are!
- dusty
- Platinum Member
- Posts: 21374
- Joined: Wed Nov 22, 2006 6:52 am
- Location: Tucson (Wildcat Country), Arizona
I would say "Don't try those flips at 60 unless you do a few every day between now and then. A lot can go wrong in 5 years".ChrisNeilan wrote:I can do that, but I find it's easier to do a backward handspring to your feet. I was blessed with gymnastic abilities, finely honed while playing right field in little league! When I turned fifty five years ago, I marked the date with five flips, nailed four of them... six for sixty?
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
Dusty
Sent from my Dell XPS using Firefox.
- ChrisNeilan
- Platinum Member
- Posts: 1462
- Joined: Sun Oct 27, 2013 5:30 pm
- Location: Waterford, Connecticut
- Contact: