Shopsmith Forums

Posted: **Sun Oct 09, 2016 9:16 pm**

What came to my mind was the set screws are not 5/32 like the 'later' ones.

Yes I noticed the shiny and newly painted thingies.

Paid no attention to the cancer sticks(also COPD sticks).

Nice bench! Stores stuff with minimal effort.

Posted: **Sun Oct 09, 2016 10:18 pm**

His bench looks a lot like mine. Had a busy day!

Posted: **Sun Oct 09, 2016 10:24 pm**

Back to the OP's question. I like to get my arbors fresh from Shopsmith. A little pricey? Yes, but I know I will get the correct one.

Posted: **Sun Oct 09, 2016 10:26 pm**

JPG wrote:Short ones(500) or long ones(505-520-M7)?

It doesn't really matter, either one(s). I would like to get some of both, but for now no preference.

ERLover wrote:
I got a bunch around, just have to check here at moms and see if they are what you need. I know I have a few in Atown at home, which none of them I use, since I dont use a SS for a TS. It may take me a day or 2 around moms, Monday will be a busy day, and Packer game tonight, Oh Da, the Packers or the 2 Buffoons tonight????
I wont be home till at least 11/4 maybe.

Thanks Bob, If you want to get rid of some of them, let me know how much and shipping and I will paypal you a gift if you want. If you can't paypal just PM me and we will work it out.

Thanks!

Posted: **Sun Oct 09, 2016 11:00 pm**

rjent wrote:
JPG wrote:Short ones(500) or long ones(505-520-M7)?
It doesn't really matter, either one(s). I would like to get some of both, but for now no preference.

ERLover wrote:
I got a bunch around, just have to check here at moms and see if they are what you need. I know I have a few in Atown at home, which none of them I use, since I dont use a SS for a TS. It may take me a day or 2 around moms, Monday will be a busy day, and Packer game tonight, Oh Da, the Packers or the 2 Buffoons tonight????
I wont be home till at least 11/4 maybe.
Thanks Bob, If you want to get rid of some of them, let me know how much and shipping and I will paypal you a gift if you want. If you can't paypal just PM me and we will work it out.

Thanks!

Ya I now, quite for 26 years, Well!!!
rjent, which ones work for you? They all seem to be a bit different except shaft diam they can fit on. Dont worry about $, pay it forward. I am not using them, came with the ERs. It will/would just complicate things. PM me with address. I will get them out later in the week, hopefully.

Posted: **Sun Oct 09, 2016 11:08 pm**

rjent, just today punctured all kinds of bubble tubes when I put out the garbage for tomorrow. Just retrieved a box and crushed shipping paper!!!

Posted: **Sun Oct 09, 2016 11:16 pm**

@JPG> "What came to my mind was the set screws are not 5/32 like the 'later' ones."
From Skip at MKC Tools, for tool rest for lathe work, interactive handles for tool rest height and angle on ERs. Early Xmas present for nephew as long as he was shipping pulleys.
http://mkctools.com/10ertoolresthandles.htm

Posted: **Sun Oct 09, 2016 11:29 pm**

rjent wrote:
JPG wrote:Short ones(500) or long ones(505-520-M7)?
It doesn't really matter, either one(s). I would like to get some of both, but for now no preference.

ERLover wrote:
I got a bunch around, just have to check here at moms and see if they are what you need. I know I have a few in Atown at home, which none of them I use, since I dont use a SS for a TS. It may take me a day or 2 around moms, Monday will be a busy day, and Packer game tonight, Oh Da, the Packers or the 2 Buffoons tonight????
I wont be home till at least 11/4 maybe.
Thanks Bob, If you want to get rid of some of them, let me know how much and shipping and I will paypal you a gift if you want. If you can't paypal just PM me and we will work it out.

Thanks!

I dropped a few drops of penetrating oil on them to let them soak for ya.

Posted: **Mon Oct 10, 2016 2:21 am**

@ JPG I dont what you were referring on "set screws" but latter tonight, AM. I took them off the blades, on the ER spindle and some were 1/8th set screws, going to have to call you Hawk Eye from now on.

Posted: **Mon Oct 10, 2016 2:30 am**

Jesus, JPG, I went back and looked at my pics, you could hardly see a set screw,so you where guessing since I said from ERs, or you got NSA/NIA and FBI computers at the Farm by you in KT.

Shopsmith Forums

1/8 Saw Blade Arbor

Re: 1/8 Saw Blade Arbor

Re: 1/8 Saw Blade Arbor

Re: 1/8 Saw Blade Arbor

Re: 1/8 Saw Blade Arbor

Re: 1/8 Saw Blade Arbor

Re: 1/8 Saw Blade Arbor

Re: 1/8 Saw Blade Arbor

Re: 1/8 Saw Blade Arbor

Re: 1/8 Saw Blade Arbor

Re: 1/8 Saw Blade Arbor