It doesn't make sense to have the extra "rivnuts" near one edge on only the rear rails. What purpose are they supposed to serve? Again
520 upgrade: lock knob with stud
Moderator: admin
-
chapmanruss
- Platinum Member
- Posts: 4536
- Joined: Tue Aug 26, 2014 8:16 pm
- Location: near Portland, Oregon
Re: 520 upgrade: lock knob with stud
My best answer =
It doesn't make sense to have the extra "rivnuts" near one edge on only the rear rails. What purpose are they supposed to serve? Again
It doesn't make sense to have the extra "rivnuts" near one edge on only the rear rails. What purpose are they supposed to serve? Again
Russ
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
-
HopefulSSer
- Platinum Member
- Posts: 684
- Joined: Sun Oct 03, 2021 6:07 pm
- Location: NC
Re: 520 upgrade: lock knob with stud
I don't get it either, hence the purpose of this thread. 
Bringing it back to and expanding the original question, original 520 owners:
1. How many studs did you get?
2. Do you have the extra rivnuts on the back rails?
Thanks!
Bringing it back to and expanding the original question, original 520 owners:
1. How many studs did you get?
2. Do you have the extra rivnuts on the back rails?
Thanks!
Greenie SN 362819 (upgraded to 520), Bandsaw 106878, Jointer SS16466, Speed Reducer 031391, Belt Sander SS48854
Mark V 510 51-014654
Mark V 510 51-014654
-
twistsol
- Gold Member
- Posts: 256
- Joined: Mon Feb 22, 2016 9:35 pm
- Location: Cottage Grove, MN
- Contact:
Re: 520 upgrade: lock knob with stud
Neither of my 520 upgrades came with multiple rivnuts on the rails. Except for the main table which has two per rail, there is 1 rivnut centered in each rail for the floating tables.
I received 2 extra screw knobs, with each kit and 3 extra springs with one of the kits. My rivnuts were not installed correctly in the rails and I had to buy a tool to seat them properly
I received 2 extra screw knobs, with each kit and 3 extra springs with one of the kits. My rivnuts were not installed correctly in the rails and I had to buy a tool to seat them properly
Thanks much,
Chris Phelps
Cheap tools are too expensive
2x Mark 5 520 and a 10ER
Chris Phelps
Cheap tools are too expensive
2x Mark 5 520 and a 10ER