Page 2 of 3
Posted: Mon Jul 13, 2009 10:30 am
by heathicus
Hi, Bill. Congrats on your purchase! I have two ERs that I have restored. I use one as a dedicated drill press and the other in horizontal mode. Although I've only used that one as a saw, I look forward to trying out the other functions!
Another great source of information is the document archive at Old Woodworking Machines (
http://www.owwm.com/mfgIndex/detail.aspx?id=338&tab=3). You can find the Owner's Guide there. Also, download the "Shopsmith Adjustments" document. That's a really good guide for getting everything aligned and true.
Posted: Mon Jul 13, 2009 11:30 am
by iclark
billmeyer wrote:I am not sure how to post a picture on this forum. When I figure that out I will post it.
Bill,
welcome to the forum. this is a great group of knowledgeable and helpful folks.
in terms of posting photos, there is a sticky thread at the top of the Community area:
Adding Pictures to a Thread or Post
https://forum.shopsmith.com/viewtopic.php?t=114
that has the instructions for putting a picture in your message. it includes the pixel size limits for the pics and helpful hints.
looking forward to seeing your pics,
Ivan
Posted: Mon Jul 13, 2009 9:42 pm
by billmeyer
Thank you for all of your replies! I really appreciate the help. Here is a picture of my ER.
Posted: Tue Jul 14, 2009 1:12 am
by mickyd
billmeyer wrote:Thank you for all of your replies! I really appreciate the help. Here is a picture of my ER.
A few weekends of TLC and she'll look like new.
Does the headstock move on the tubes?
Headstock
Posted: Tue Jul 14, 2009 1:25 am
by billmeyer
The headstock did not move when I first got it, but with minimal work with WD40 and a dead blow hammer plus some emory cloth, I have it totally free. I still need to remove some heavier rust at the very top, but the headstock will travel over it roughly. It shouldn't take too much longer to fix that. That is all I have really done to it so far, except for some cleaning.
Bill
Info for your 10Er
Posted: Thu Jul 16, 2009 10:25 am
by dontolbert
Bill, congrats on your purchase. I recently (last summer) did a full restoration on my 10er and love it. Here's a site you might consider.
http://www.owwm.com/mfgindex/pubdetail.aspx?id=2746
This site (all about old woodworking machines) has numerous booklets about the 10er, popular mechanics articles, and other "nuggets" of info.
I'm by no means an expert, but let me know if you need any questions answered as I'm only 45 minutes south of you in Bentonville, AR
Thanks!
Don Tolbert
Posted: Thu Jul 16, 2009 10:28 pm
by billmeyer
Don,
Thanks for the info. That name sounds familiar to me. Do or did you work for that major employer there? I was an assistant in Bartlesville, Tulsa, traffic circle and Sapalpa many years ago.
Bill
Posted: Thu Jul 16, 2009 10:42 pm
by wlhayesmfs
OK Bill and Don too much is sounding like the same Major Retailer I have been working for for 22 years. I have been in theTulsa area for the last 15, I know a Bill Meyer's that worked in Loss Prevention sometime back but have not seen him in years. I have just picked up my 9th ER and brought it home from KC. Only have 6 working ER's at the house rebuilt and sold some and gave one away, but maybe we need to get together off site.
wlhayes@cox.net and compare stories and machines.
Posted: Fri Jul 17, 2009 2:04 am
by billmeyer
Bill,
I sent you an e-mail. Interesting that there are so many of us in this general area.
Bill
"Major Retailer"
Posted: Fri Jul 17, 2009 9:56 pm
by dontolbert
Bill, yes. I worked at old store # 12 in Claremore back in the Spring of '90.
"retired" from them back in '00 and now work for a supplier of fruit juice (Apple, Cranberry, ect...)