Page 2 of 3
Posted: Sun Nov 08, 2009 12:01 am
by a1gutterman
and wrote:I picked the tool up from a guy that only used a few times and he bought it from someone that looks like used the table saw a few times but not anything else . i'm interested in using the lathe ! and was wondering if you can use the "drillpress" as aover head router
Yes you can, but you should use the router chuck, and the high speed is knot as fast as many router users wood like.
1/4 chuck 1/2 chuck In general, the drill chuck is knot made to be used with router bits.
Posted: Sun Nov 08, 2009 12:04 am
by beeg
Looks like it may be from 1983 and that would be a Mark 500, unless it was upgraded to a 510 or a 520.
Posted: Sun Nov 08, 2009 12:05 am
by and
Is there any way to know whether or not what i have has all the parts and what nots its supposed to have before i get to far along and thanks for the info at least i know its birthday
Posted: Sun Nov 08, 2009 12:07 am
by beeg
Can ya post a pic of what ya have?
Posted: Sun Nov 08, 2009 12:10 am
by and
I'm a slow go at this forum stuff I just figured out that someone responed to my ? about the overhead is the router chuck an asc. that can be picked up from anywhere or ss only
Posted: Sun Nov 08, 2009 12:10 am
by a1gutterman
and wrote:Is there any way to know whether or not what i have has all the parts and what nots its supposed to have before i get to far along and thanks for the info at least i know its birthday
If you click on the link in
this post, you will be able to order a manual. The manual knot only tells you how to operate it, but how to assemble it too. You will be able to see if anything is missing with it in your possession. One good thing about SS, is that you can still order most parts for even very old units.
Posted: Sun Nov 08, 2009 12:13 am
by a1gutterman
and wrote:I'm a slow go at this forum stuff I just figured out that someone responed to my ? about the overhead is the router chuck an asc. that can be picked up from anywhere or ss only
Those are SS parts. No other supplier will have them but you can always check places like e-bay, craigs list, etc.
Posted: Sun Nov 08, 2009 12:15 am
by and
i can't right now but tomrrow morning i'm uloading it from my van and can a pic of all the wigets anad johnson rods that i was given . I and dont want to give you the wrong impression i am soooooo happy to get this machine i really couldn't afford one before but i got a great deal on this one and it works fine i just dont know anything about it
Posted: Sun Nov 08, 2009 12:18 am
by and
Thanks alot the info you have given me is great and cant wait to tell you how my first turning goes once i get it in lathe mode
Posted: Sun Nov 08, 2009 12:28 am
by beeg
DO KNOT TURN the speed dial, unless the motor is running.