Moved At Last

Moderator: admin

User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

8iowa wrote:Jim:

Congratulations on your move. Five years ago we moved to Gainesville to be closer to our son and daughter. Boy! It's a lot of work, and getting "reorganized" takes more time than you think.

I have two nephews in Denver. Last year I gave them a 510 with bandsaw and jointer. Now if they need to have something fixed I'll know where to send them.
8iowa,

Thanks for the good wishes. If ever I can assist the nephews let me know. Jim
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

dusty wrote:I am so glad to hear that you have finally been able to make this long wanted move and that it has been done safely. I also envy you for having the task of rebuilding your shop. You now have the opportunity to correct all of those little nagging inefficiencies of the old shop.

I see two things that must be done rather soon. One would be to set up a suitable workbench area. This may be temporary but you need a work bench.

The other is to unpack, set up and align one of the Mark Vs. Once these two tasks are done, you are ready and able to take on the rest of the house.

Oh yah. Locate an outlet for building supplies and tools.

Good luck Jim. Take on these new tasks and all those that I have not thought about in a safe and sane manner. Doing so will allow you to soon be ready to make sawdust in your new location.
Dusty,

Every day the last couple of weeks I have wished for a few minutes to check this forum and catch up on the wisdom you and others offer. Sadly the events of moving prevented that. With the move completed we are realizing just how difficult it is to move from 4,000 square feet to 2,000 square feet. I decided to spend a couple of hours on the shop today. I managed to position my primary storage cabinet and install the shelves. Then discovered all of the items I store within it are buried in the garage. I actually have a huge built in work bench in the garage. The interesting part being the prior owners had two really tall sons. I feel like a midget when trying to use it. I did bring four workbenches from Virginia. Two are buried under box mountain. Two are in the shop and hopefully will in a useable state in a day or two. I wish I had pictures of my shopsmith tools being carried though a large basement window. A couple of neighbors offered an observation I would never get them down there. I have discovered an electrical problem in the shop area. Hopefully I can get an electrician out soon to correct the issue. More later. Jim
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

nuhobby wrote:Sounds exciting! Glad to have you back on the Forums.
Chris and others making positive comments,

I am thrilled to have a few minutes to get back on the forum. I miss the banter and great ideas I learn here. A couple of friends and my son were unloading items from the last Pod Friday, One commented this cabinet will never go down the stairs and the shop is already too full. I asked that the take it down anyhow. Yesterday I unwrapped the moving blanket and shared it with my son. After he realized all of the items it was designed to store and make handy for use he said, wow Dad that is the best use of space and organizational method I have ever seen. Now with that sort of affirmation how can a fellow stay out of his shop for very long?! Jim
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

fjimp wrote:Chris and others making positive comments,

I am thrilled to have a few minutes to get back on the forum. I miss the banter and great ideas I learn here. A couple of friends and my son were unloading items from the last Pod Friday, One commented this cabinet will never go down the stairs and the shop is already too full. I asked that the take it down anyhow. Yesterday I unwrapped the moving blanket and shared it with my son. After he realized all of the items it was designed to store and make handy for use he said, wow Dad that is the best use of space and organizational method I have ever seen. Now with that sort of affirmation how can a fellow stay out of his shop for very long?! Jim
Putting everything in its place in that cabinet should free up a lot of room!

Hope the 'rest' gets located soon so you can be can be 'productive' again!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
dlbristol
Platinum Member
Posts: 874
Joined: Tue Oct 24, 2006 4:57 pm
Location: Collbran, Colorado

Welcome to Colorado!

Post by dlbristol »

Welcome to Colorado Jim. Glad your move went well, and don't let anybody give you to much grief about winters here. I will tell you the worst winter I ever spent anywhere was not in Colorado, but Georgia!! Maybe we can get together some time. Right now, I am getting my last kid graduated from college and don't have time to do much else. He has a job, so I can't complain at all. Just lots of time traveling and getting him moved into a new place. :)
Saw dust heals many wounds. RLTW
Dave
User avatar
a1gutterman
Platinum Member
Posts: 3653
Joined: Tue Jan 09, 2007 12:45 am
Location: "close to" Seattle

Post by a1gutterman »

I am glad that you made it to Colorado. I know you have had that goal for some time. I hope it is all you wished for.
Tim

Buying US made products will help keep YOUR job or retirement funds safer.
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

dlbristol wrote:Welcome to Colorado Jim. Glad your move went well, and don't let anybody give you to much grief about winters here. I will tell you the worst winter I ever spent anywhere was not in Colorado, but Georgia!! Maybe we can get together some time. Right now, I am getting my last kid graduated from college and don't have time to do much else. He has a job, so I can't complain at all. Just lots of time traveling and getting him moved into a new place. :)
Dave Once your time frees up a bit I would enjoy meeting with you. Congratulations on the upcoming graduation. I am certain you are very proud. Fjimp
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
User avatar
fjimp
Platinum Member
Posts: 2345
Joined: Wed Jul 19, 2006 8:45 pm
Location: Lakewood, Colorado

Post by fjimp »

a1gutterman wrote:I am glad that you made it to Colorado. I know you have had that goal for some time. I hope it is all you wished for.
Tim,

It is great to be home. I will be more relaxed once we are unpacked. The smaller house is beginning to grow on me. The bride is thrilled. She has wante34d less to care for for years. Jim
F. Jim Parks
Lakewood, Colorado:)

When the love of power is replaced by the power of love the world will have a chance for survival.
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

Tim, I hope ya had an uneventful move and can FIND everything now. :D
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

Fjimp: Is it now the time to edit your profile as to your '10-20'?:D
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply