Shopsmith Forums

I found mine on Craig's list. I saw 2 for sale up in your area about 3 weeks ago. Be patient and get a later model (510 or 520) like Chuck mentioned. By the way I live in Jacksoville, AL 36265. Not too far away! I am still learning how to use mine. Had great fun over Thanksgiving! Get the manuals and PTW (power tool woodworking manual). Tons of good info. Sawdust sessions on this web site are excellent as well. Please keep us posted on your search.

Hi, I've got a SS Mark 7 in Columbus GA available if you are still looking-

It needs a bit of work or a new part, but i think that is all part o fthe charm of these machines. This is a vintage one, and part of the beauty of these machines is the process of restoring them.

It is all functional except the aluminum casting of the tool rest carriage is broken on one side- I had a Dig-In on a large turning project. It could be welded by an experienced aluminum welder, or replaced.

Maybe someone here could answer this too- will a carriage for a Magna (or newer) Mark 5 fit these rails and accessories?

Motor works, Plastic Speed Cam is fully in-tact, reversible switches function, has original switch keys.

This Model also has the blower/dust collector, and does double tilt.

Does not still have retracting feet- they were missing when i got it.
I have most of the original basic equipment with it- sanding disc, table saw arbor, mystery arbor, jacobs chuck, aftermarket pen turning mandrel, aftermarket live center for turning, a 4-jaw turning chuck, table saw table with original fence, one end mounting table for the table saw or other accessories, tail mount for lathe.

let me know if anyone is interested.

GA Ben wrote:Hi, I've got a SS Mark 7 in Columbus GA available if you are still looking-

It needs a bit of work or a new part, but i think that is all part o fthe charm of these machines. This is a vintage one, and part of the beauty of these machines is the process of restoring them.

It is all functional except the aluminum casting of the tool rest carriage is broken on one side- I had a Dig-In on a large turning project. It could be welded by an experienced aluminum welder, or replaced.

Maybe someone here could answer this too- will a carriage for a Magna (or newer) Mark 5 fit these rails and accessories?

Motor works, Plastic Speed Cam is fully in-tact, reversible switches function, has original switch keys.

This Model also has the blower/dust collector, and does double tilt.

Does not still have retracting feet- they were missing when i got it.
I have most of the original basic equipment with it- sanding disc, table saw arbor, mystery arbor, jacobs chuck, aftermarket pen turning mandrel, aftermarket live center for turning, a 4-jaw turning chuck, table saw table with original fence, one end mounting table for the table saw or other accessories, tail mount for lathe.

let me know if anyone is interested.

Way tube spacing the same, but pinion gear(elevator) on opposite side of table support tubes. I think the carriage can be mounted reversed and the 'controls' reattached to the opposite side.

However, there are those rack gear teeth on the way tubes.

Short answer - Sorta!]http://www.shopsmith.net/forums/showthr ... post103711[/url]

I have one in Columbus, GA.

It needs a part, but i have already located one on this forum- check out the maintenance section.

It is a Magna Mark 7. I have most all of the original basic equipment that came with it. I have also "rebuilt" - or cleaned and lubed the inner workings of the power head, and kept it in very good mechanical order. the sheaves work nicely, and the speed cam is in quite good condition. the motor spins both ways and the original switches are functioning. I have bought a higher capacity dedicated lathe, and am moving, and the wife says Ive got to clean out.

Let me know if anyone is interested.

Thanks JPG!

Every thingyou want w/o the trouble of ordering.

Got enough room for ALL of it.
For when the listing expires...........It's NOT my listing......

Everything listed below is a complete PACKAGE DEAL and you can buy it now for $5000.00

MARK V PRO Plus the following:

(MOST ITEMS BELOW ARE NEW AND IN ORIGINAL BOXES)

All Manuals and "Hands On" Project CDRoms ( 11 Different DVDs, retail for a total of $180.00)
Belt Sander 555355 plus many sanding belts
Scroll Saw 555715
Strip Sander 555509
2- Magna Dado 505514 Saw Blades (no longer made but brand new)
1- Super Broad Point Drill Set
1- Chisel Sharpening 555812
1- Cross cut sliding table 516524
1- Lathe Chisel Set 505586
1- Universal Hold Down
1- pkg 12" sanding discs 555143
1- Conical sanding disc 555435
1- 3 3/4" Lathe Face Plate 505590
1- Lathe Duplicator 555638
1- Mark V Fence Retrofit Kit 555646
1- Utility Light 505503
1- Tenon Mate Jig 555479
1 - Lift Assist 555975
1- Accessory Shelf 555551
1- Specialty Lathe Rest 90 deg tool rest 555313
1- Aux table 555526
1- 2 1/4" drum sander
1- On/Off Safety Switch
1- Extra power cord
1- Router Table Kit and Safety Shield
Several used lathe rests and other misc items
New Dust Collector 330002 ( Retail for $555.00) With Many Bags, Hoses, Adpaters and Extensions (Retailing for an Additional $180.00)
New 12" Pro Planer on own stand 555082 (retails for $1450.00) and comes with one extra blade
New replacement motor with shear 516152 (retails for $423)
Band Saw Table 502732 Used
Used router arm
Used Scroll Saw
Router Chuck and Shield 555191
Band Saw Accessories 555645/555488/555489
Second New Utility Light 505503
PLUS AN ADDITIONAL SHOPSMITH MARK V, ( DISASSEMBLED, has most parts)
Rare SHOPSMITH Driven AIR COMPRESSOR

"Buy It Now" Price of $5000.00 is for COMPLETE PACKAGE OF EVERYTHING LISTED ABOVE AND MANY MORE MISC PARTS AND ADAPTERS NOT LISTED.

ALL ITEMS TOGETHER IF ADDED UP ON SHOPSMITH WEBSITE WOULD SELL FOR (at least) $14,000.00

PREFER PICK UP , SHIPPING POSSIBLE AT BUYERS EXPENSE

Check out the Saw Dust session on buying a used Shopsmith. It has a PDF printout for a check list. Good luck, I have found all of mine on Craigslist.

What is displayed is certainly worth the $5000 asking price. It would almost be worth the drive to go get it even if all you were going to do is remarket it. I do believe that sold separately, one would recover all of his investment with a good ROI.

Here is a link to a current 510 for sale in Hunstville. http://www.shopsmith.net/forums/images/ ... iggrin.gif

My apologies. Here is the link to Craigs List in Huntsville with the Shop Smith.
http://huntsville.craigslist.org/tls/2747441683.html