Shopsmith Forums

Posted: **Sun Feb 19, 2012 4:58 pm**

bffulgham wrote:I gave the thing a good scrubbing with Murphy's Oil Soap today, then grabbed the measuring stick.....Here's a few of the details for those that are interested.

The carcase outside frame is all 1" oak.
The table top is 1" oak.
The cubby-hole dividers are 7/32"
The shelves dividing the cubbies are 1/2" EXCEPT the very bottom and top, and they are 3/4"

The next step is to clear out all the computer junk in my office and get my step-son to help me move it in place....that will be a trick in itself, as it will have to be stood on end to be able to negotiate the hallway and make the corner going into the 'office'

Take the legs off!;)

Posted: **Sun Feb 19, 2012 9:56 pm**

[quote="JPG40504"]Take the legs off!]
Yep, gonna have to. Gave it a shot on trying to move it in this afternoon.....not enough ceiling height to up-end it long way....could do it by laying it on its back and then up. To do the reverse in the office, I would have to take my desk apart; move the desk out; move the cabinet in; put the desk back......not enough time (or wanna-do) to mess with all that. Another project for another day:rolleyes:

Shopsmith Forums

An old family friend came back