Shopsmith Forums

Nice job, greasemonkey!

Yes, everything did get the full polish treatment. As soon as I re-size some pictures I will upload them.

Here are the pics I had of everything polished; I just realized that I do not have an up close pic of the headstock but I hope these are what you are looking for.

Nice Indeed!

Noticed ye fought and almost won the caster reassembly battle.

Posted the previous before 'seeing' your last post. I see in your casters pix that you apparently did the second as you got it(almost).

Realize the only 'left' right pair parts are the castings. All the other parts make a left right set by the way they are assembled.

The crank(foot pedal) should be concave upward and they should be on the ends either both in front or both in the rear.

Not meaning to be 'nit picky'!

They be like a Chinese puzzle!

JPG wrote:Posted the previous before 'seeing' your last post. I see in your casters pix that you apparently did the second as you got it(almost).

Realize the only 'left' right pair parts are the castings. All the other parts make a left right set by the way they are assembled.

The crank(foot pedal) should be concave upward and they should be on the ends either both in front or both in the rear.

Not meaning to be 'nit picky'!

They be like a Chinese puzzle!

I corrected the casters as per your instruction when I first posted my restoration but these are still the original pics.

Here is my first 10ER restoration. Enjoy!

OK, the belts are installed since the middle of January. See the last picture.

jsburger wrote:Here is my first 10ER restoration. Enjoy!

John,

As I said before, beautiful job however, I do not think that your restoration is complete unless you are using those new-fangled invisible v-belts...

greasemonkey2275 wrote:

jsburger wrote:Here is my first 10ER restoration. Enjoy!

John,

As I said before, beautiful job however, I do not think that your restoration is complete unless you are using those new-fangled invisible v-belts...

Jake, I totally agree with you. I thought about that before I posted. I could have taken them off mu dedicated 10ER drill press for the pictures but... They will be on order next week from Skip Campbell.

There's some beautiful machines on this thread, I think there are some artist's here.