New Look Forum

Moderator: admin

charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Re: Suddenly, No Pictures

Post by charlese »

kablerj wrote:Up until today, everything about the forum update was working fine for me. I am using prosilver with internet explorer.

Suddenly today, all past posts are missing their pictures. Only this one post http://www.shopsmith.com/ss_forum/viewt ... =6&t=15672 which was started today, still displays pictures.

I tried changing to Shopsmith and shopsmith1 to no avail.

I also tried on a second computer using firefox. No go

Jim
--------------------------------------------------------------------------------

It was good to read your post, kblerj!!
Same thing happened to my computer.

Actually, I found that when pictures that were moved here from other sites, they show. No photos that were posted by members - taken by members don't open. Also member's icons also don't show/ Only a small rectangle that indicates there is a picture there somewhere.

I've been wondering if I pushed a button (key) somewhere unknown.

I'm using Windows 8.1 and google.
9
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
User avatar
rjent
Platinum Member
Posts: 2121
Joined: Fri Mar 14, 2014 3:00 pm
Location: Hot Springs, New Mexico

Re: New Look Forum

Post by rjent »

Same with me, also notice no Avatars ....
I am sure admin is working on it!

FWIW
Dick
1965 Mark VII S/N 407684
1951 10 ER S/N ER 44570 -- Reborn 9/16/14
1950 10 ER S/N ER 33479 Reborn July 2016
1950 10 ER S/N ER 39671
1951 jigsaw X 2
1951 !0 ER #3 in rebuild
500, Jointer, Bsaw, Bsander, Planer
2014 Mark 7 W/Lift assist - 14 4" Jointer - DC3300
And a plethora of small stuff .....

"The trouble with quotes on the Internet is that you can never know if they are genuine." - Benjamin Franklin
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: New Look Forum

Post by JPG »

Fear not! I think everyone is 'experiencing' the same stuff. All attachments after the other day are not displaying(they seem to have 0 bytes), but those linked to are displaying.

Hopefully they are not 'lost'.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
wa2crk
Platinum Member
Posts: 3080
Joined: Sat Jul 22, 2006 7:37 am
Location: Leesburg, Fl

Re: New Look Forum

Post by wa2crk »

I hate to be the odd man out but stuff seems to be displaying OK on my computer
I am using an HP Pavilion about 4 years old and IE11 as the browser and my ISP is Century Link.net
What are the others using?
Bill V
User avatar
algale
Platinum Member
Posts: 4841
Joined: Thu Nov 04, 2010 8:13 am

Re: New Look Forum

Post by algale »

Things seem to be back up and running properly as of about 9 AM Eastern.
Gale's Law: The bigger the woodworking project, the less the mistakes show in any photo taken far enough away to show the entire project!

User avatar
admin
Gold Member
Posts: 382
Joined: Wed May 24, 2006 1:14 pm
Location: Dayton, OH
Contact:

Re: New Look Forum

Post by admin »

algale wrote:Things seem to be back up and running properly as of about 9 AM Eastern.
The forum is having intermittent problems with the attachments.

Unfortunately it's like a puppy dog; From all the comments, I see the evidence of misbehavior, but everything is fine whenever I'm watching it. Hopefully soon I'll catch it in the act and be able to correct it.
Shopsmith I.T.
User avatar
forrestb
Platinum Member
Posts: 528
Joined: Fri Dec 08, 2006 6:22 pm
Location: Huntington Beach CA

Re: New Look Forum

Post by forrestb »

I feel for you, admin. My car does the same thing!
Forrest
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: New Look Forum

Post by JPG »

forrestb wrote:I feel for you, admin. My car does the same thing!
Forrest

And a lot of stuff around here!!!! :(
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Re: New Look Forum

Post by beeg »

admin wrote:
algale wrote:Things seem to be back up and running properly as of about 9 AM Eastern.
The forum is having intermittent problems with the attachments.

Unfortunately it's like a puppy dog; From all the comments, I see the evidence of misbehavior, but everything is fine whenever I'm watching it. Hopefully soon I'll catch it in the act and be able to correct it.

It just seems to me that the intermittent problem happens on Sundays.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: New Look Forum

Post by JPG »

beeg wrote:
admin wrote:
algale wrote:Things seem to be back up and running properly as of about 9 AM Eastern.
The forum is having intermittent problems with the attachments.

Unfortunately it's like a puppy dog; From all the comments, I see the evidence of misbehavior, but everything is fine whenever I'm watching it. Hopefully soon I'll catch it in the act and be able to correct it.

It just seems to me that the intermittent problem happens on Sundays.
It Ain't Sunday.
its back.jpg
its back.jpg (195.44 KiB) Viewed 1779 times
Then again, those are not jpeg files!
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Post Reply