Heads Up - Bargain 'available'
Moderator: admin
-
newportcycle
- Gold Member
- Posts: 190
- Joined: Sat May 05, 2012 5:43 am
- Location: Pittsfield, Maine
Re: Heads Up - Bargain 'available'
That's a steal, everyone around here price's used shopsmith equipment like new.
-
br549
- Platinum Member
- Posts: 645
- Joined: Sun Nov 30, 2014 8:51 am
- Location: Midway between Houston/Galveston, TX
Bargain 'available' 520, BS, BSander, J, DC3300 & more $2500
https://houston.craigslist.org/tls/d/mu ... 00242.html
I have seen this ad for quite a while on Craigslist, and even on ebay once upon a time, for a higher price.
Price has been dropped at least once.
I see at least three major accessories and the DC, plus it looks like a lot of smaller accessories too, such as Tenon Master.
Might be a good Christmas present for somebody looking for a fairly complete shop.
I have seen this ad for quite a while on Craigslist, and even on ebay once upon a time, for a higher price.
Price has been dropped at least once.
I see at least three major accessories and the DC, plus it looks like a lot of smaller accessories too, such as Tenon Master.
Might be a good Christmas present for somebody looking for a fairly complete shop.
- Attachments
-
- 01414_cxfHeYRLIvB_1200x900.jpg (91.33 KiB) Viewed 11948 times
-
- 01010_dKDLzXnwbDu_1200x900.jpg (90.81 KiB) Viewed 11948 times
-
- 00f0f_c3x5zDNUwqx_1200x900.jpg (73.67 KiB) Viewed 11948 times
Re: Heads Up - Bargain 'available'
500 w/PowerPro upgrade in Rogers, Arkansas area.
https://fayar.craigslist.org/tls/d/shop ... 78160.html
https://fayar.craigslist.org/tls/d/shop ... 78160.html
Roy
Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Sawstop 3HP 36" PCS w/router table insert
Home designed and built CNC router, another CNC router
desktop size
CNCed G0704 milling machine
Laser engraver
Way too much other stuff and not enough space
Mark V/510, Mark V/500 with parts for 510 upgrade, bandsaw, jointer, belt sander, DC3300 w/1 micron bag
Sawstop 3HP 36" PCS w/router table insert
Home designed and built CNC router, another CNC router
desktop sizeCNCed G0704 milling machine
Laser engraver
Way too much other stuff and not enough space
Re: Heads Up - Bargain 'available'
https://minneapolis.craigslist.org/wsh/ ... 56550.html
FREE - hope some can save it
FREE - hope some can save it
- ss.png (324.07 KiB) Viewed 11645 times
-
JPG
- Platinum Member
- Posts: 35457
- Joined: Wed Dec 10, 2008 7:42 pm
- Location: Lexington, Ky (TAMECAT territory)
Re: Heads Up - Bargain 'available'
With a lathe duplicator no less!
╔═══╗
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
╟JPG ╢
╚═══╝
Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Re: Heads Up - Bargain 'available'
Hello,
So this is not an offer to sell, but a request for advice. My dad recently passed away, and we have his Mark VII with lots of attachments which we need to do something with. Although I do a reasonable amount of hands-on work in my spare time, most of the carpentry is really more like rough carpentry (shed building, rough projects) rather than fine woodworking, and I don't think I have the time to do the refurbishing that the Mark VII (mid-60's vintage) would require. So we would really like this machine to go to someone who could use it, rather than to a scrap yard. My main question is: where is the best place to advertise this, or the best way to locate someone local who might be able to refurbish and use this machine? Is it all craigslist and eBay, or is there a better way to go?
Thanks in advance,
Jay
So this is not an offer to sell, but a request for advice. My dad recently passed away, and we have his Mark VII with lots of attachments which we need to do something with. Although I do a reasonable amount of hands-on work in my spare time, most of the carpentry is really more like rough carpentry (shed building, rough projects) rather than fine woodworking, and I don't think I have the time to do the refurbishing that the Mark VII (mid-60's vintage) would require. So we would really like this machine to go to someone who could use it, rather than to a scrap yard. My main question is: where is the best place to advertise this, or the best way to locate someone local who might be able to refurbish and use this machine? Is it all craigslist and eBay, or is there a better way to go?
Thanks in advance,
Jay
Re: Heads Up - Bargain 'available'
Sorry for your loss, and thank you for wanting to have the Mark VII go to a good home.drjay wrote:Hello,
So this is not an offer to sell, but a request for advice. My dad recently passed away, and we have his Mark VII with lots of attachments which we need to do something with. Although I do a reasonable amount of hands-on work in my spare time, most of the carpentry is really more like rough carpentry (shed building, rough projects) rather than fine woodworking, and I don't think I have the time to do the refurbishing that the Mark VII (mid-60's vintage) would require. So we would really like this machine to go to someone who could use it, rather than to a scrap yard. My main question is: where is the best place to advertise this, or the best way to locate someone local who might be able to refurbish and use this machine? Is it all craigslist and eBay, or is there a better way to go?
Thanks in advance,
Jay
It would help to know what city you are in. Posting here may generate a PM (Private Message) from an interested member. In addition to Craigslist, try posting on the Shopsmith Fans Buy, Sell, and Wanted Facebook Group.
Ron Dyck
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
==================================================================
10ER #23430, 10ER #84609, 10ER #94987,two SS A-34 jigsaws for 10ER.
1959 Mark 5 #356595 Greenie, SS Magna Jointer, SS planer, SS bandsaw, SS scroll saw (gray), DC3300,
Re: Heads Up - Bargain 'available'
Ron,rpd wrote:Sorry for your loss, and thank you for wanting to have the Mark VII go to a good home.drjay wrote:Hello,
So this is not an offer to sell, but a request for advice. My dad recently passed away, and we have his Mark VII with lots of attachments which we need to do something with. Although I do a reasonable amount of hands-on work in my spare time, most of the carpentry is really more like rough carpentry (shed building, rough projects) rather than fine woodworking, and I don't think I have the time to do the refurbishing that the Mark VII (mid-60's vintage) would require. So we would really like this machine to go to someone who could use it, rather than to a scrap yard. My main question is: where is the best place to advertise this, or the best way to locate someone local who might be able to refurbish and use this machine? Is it all craigslist and eBay, or is there a better way to go?
Thanks in advance,
Jay
It would help to know what city you are in. Posting here may generate a PM (Private Message) from an interested member. In addition to Craigslist, try posting on the Shopsmith Fans Buy, Sell, and Wanted Facebook Group.
Thanks, and thanks for the advice. I am in Olney MD, and the Shopsmith is nearby in Rockville MD.
Regards,
Jay