New Power Pro coming!

Create a review for a woodworking tool that you are familiar with (Shopsmith brand or Non-Shopsmith) or just post your opinion on a specific tool. Head to head comparisons welcome too.

Moderator: admin

User avatar
beeg
Platinum Member
Posts: 4790
Joined: Sun Oct 14, 2007 2:33 pm
Location: St. Louis,Mo.

Post by beeg »

Also besides the weather, there was the Super Bowl. Which fedex claims caused delays in delivery.
SS 500(09/1980), DC3300, jointer, bandsaw, belt sander, Strip Sander, drum sanders,molder, dado, biscuit joiner, universal lathe tool rest, Oneway talon chuck, router bits & chucks and a De Walt 735 planer,a #5,#6, block planes. ALL in a 100 square foot shop.
.
.

Bob
User avatar
nuhobby
Platinum Member
Posts: 2366
Joined: Fri Sep 21, 2007 4:34 am
Location: Indianapolis

Post by nuhobby »

ChrisNeilan wrote:I love snow as much as the next guy, really, I do! But not when it messes up with FedEx!!! The Mark 7 was due today but because of the snow not gonna happen. They can't get it here until Monday, bummer. They tell me I can pick it up at the freight yard if I want to, only about 40 miles away...
Can anyone tell me how big a box this is coming in (also the box for the dust collector)? I have a 1994 Dodge Ram pickup (6 foot bed)... I think it will make it there and back (no heat!)!!!
Chris
I think you could just fit both things in your truck bed. The weight of the Mk 7 is a "duesy," though, probably over 250 lbs.
Chris
User avatar
ChrisNeilan
Platinum Member
Posts: 1463
Joined: Sun Oct 27, 2013 5:30 pm
Location: Waterford, Connecticut
Contact:

Post by ChrisNeilan »

Not concerned about the weight so much, at 55 I can lift that. As a funeral director I have learned how to transfer much more that that! Once picked up a used outboard motor weighing in at close to 350 lbs by myself... Now that was stupid!~
User avatar
benush26
Platinum Member
Posts: 1104
Joined: Mon Mar 19, 2012 7:06 pm
Location: Montana

Post by benush26 »

If the M7 box will not fit front to back, it should fit at an angle. Got my DC used so no clue about the box size but should fit as a passenger :D

If you wait until Monday you will miss the WHOLE weekend to get to know your knew toy!! Go get it and enjoy!! Though drive safely and carefully!!

You did say that lifting is not a problem, but I would have a friend help you unload it. If you decide to tip it upside down to install the legs I would presume that a friend would be a huge help. I just set mine on saw horses to install the legs, but an extra set of hands would have been a help.

Congratulations!

Be well,
Ben
cooch366
Gold Member
Posts: 337
Joined: Fri Dec 23, 2011 1:48 pm
Location: North Central Massachusetts

it will fit

Post by cooch366 »

I picked my new M7 at lowe's a while back, and it will fit in a 6' bed (that is what I have. They loaded it with a fork lift.

When I got home, I opened the box and unloaded it in pieces. No problem...

Enjoy....
User avatar
ChrisNeilan
Platinum Member
Posts: 1463
Joined: Sun Oct 27, 2013 5:30 pm
Location: Waterford, Connecticut
Contact:

Post by ChrisNeilan »

Thanks for the info... I definitely have plans to play this weekend!
Chris
User avatar
ChrisNeilan
Platinum Member
Posts: 1463
Joined: Sun Oct 27, 2013 5:30 pm
Location: Waterford, Connecticut
Contact:

Post by ChrisNeilan »

It's Stuck In Middletown, Pa!!!
charlese
Platinum Member
Posts: 7501
Joined: Fri Dec 08, 2006 10:46 pm
Location: Lancaster, CA

Post by charlese »

Hi Chris! I can only recommend patience, my man!
Thinking of all the things that can go wrong with your intended venture to get the thing with your pickup truck it is really best to wait. Getting stuck in PA is just one of the aspects of MURPHY'S LAW :eek: Thousands of $$ at stake!

If you just wait for Fed EX to deliver, you can avoid any and all of the things that could go bad that could be your fault. If bad stuff happens to Fed EX, it doesn't happen to you. All you could lose is time and mental stress. Shopsmith and Fed Ex are insured and will cover any losses/damage that may occur. I know Shopsmith is good for replacements and they can settle with Fed Ex, if needed.

Please wait.! After final delivery, it will be only a day or two for you to forget about this frustration that is clearly caused by weather.
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Post by JPG »

charlese wrote:Hi Chris! I can only recommend patience, my man!
Thinking of all the things that can go wrong with your intended venture to get the thing with your pickup truck it is really best to wait. Getting stuck in PA is just one of the aspects of MURPHY'S LAW :eek: Thousands of $$ at stake!

If you just wait for Fed EX to deliver, you can avoid any and all of the things that could go bad that could be your fault. If bad stuff happens to Fed EX, it doesn't happen to you. All you could lose is time and mental stress. Shopsmith and Fed Ex are insured and will cover any losses/damage that may occur. I know Shopsmith is good for replacements and they can settle with Fed Ex, if needed.

Please wait.! After final delivery, it will be only a day or two for you to forget about this frustration that is clearly caused by weather.

Sure! Blame it on the weather!:D








Good advice methinks!:)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
ChrisNeilan
Platinum Member
Posts: 1463
Joined: Sun Oct 27, 2013 5:30 pm
Location: Waterford, Connecticut
Contact:

Post by ChrisNeilan »

yeah, I know..... To quote Herman Munster..."Darn, darn, darn!"
Post Reply