GREAT to have you back

Moderator: admin

GetterDone
Gold Member
Posts: 408
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: GREAT to have you back

Post by GetterDone »

I am also having issues with the E-mail stuff.

Today I tried to log in at work today on my work computer, and it asked me for a Password

I used the (I forgot my password) and I never received a Junk or a Good email :)

I still have a Saved password on the laptop at home. :cool:

I hope I don't lose contact. :eek:
Dwayne

1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: GREAT to have you back

Post by jsburger »

admin wrote: Mon Jan 12, 2026 10:58 am I checked the logs and your email provider is currently blocking our emails. I submitted a request to them to remove the block. Our forum runs on a cloud VPS, so we inherited the email reputation of the prior user of our IP address.

jsburger wrote: Sun Jan 11, 2026 10:24 pm
admin wrote: Sun Jan 11, 2026 4:43 pm Can you let me know if it is now working for you. I made a correction and did receive an email myself.

No it is not. Over the years some people have said it never worked for them. It has always worked for me until now.
Thank you. I will also check with my provider.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: GREAT to have you back

Post by jsburger »

jsburger wrote: Tue Jan 13, 2026 11:49 am
admin wrote: Mon Jan 12, 2026 10:58 am I checked the logs and your email provider is currently blocking our emails. I submitted a request to them to remove the block. Our forum runs on a cloud VPS, so we inherited the email reputation of the prior user of our IP address.

jsburger wrote: Sun Jan 11, 2026 10:24 pm

No it is not. Over the years some people have said it never worked for them. It has always worked for me until now.
Thank you. I will also check with my provider.
OK, I contacted my provider and read them verbatim what you said. The totally understood the issue. However they can't do anything until they get your request. The IP address is shared (cloud VPS) and you have to give them verified information so they let the emails through. I may not have that exactly correct but I guess you know what has to be done.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: GREAT to have you back

Post by jsburger »

jsburger wrote: Tue Jan 13, 2026 5:51 pm
jsburger wrote: Tue Jan 13, 2026 11:49 am
admin wrote: Mon Jan 12, 2026 10:58 am I checked the logs and your email provider is currently blocking our emails. I submitted a request to them to remove the block. Our forum runs on a cloud VPS, so we inherited the email reputation of the prior user of our IP address.


Thank you. I will also check with my provider.
OK, I contacted my provider and read them verbatim what you said. The totally understood the issue. However they can't do anything until they get your request. The IP address is shared (cloud VPS) and you have to give them verified information so they let the emails through. I may not have that exactly correct but I guess you know what has to be done.
Well, as soon as I posted the above I got an email notification. So I guess my provider did something while I was on the phone with them.
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
User avatar
admin
Gold Member
Posts: 382
Joined: Wed May 24, 2006 1:14 pm
Location: Dayton, OH
Contact:

Re: GREAT to have you back

Post by admin »

I had put the blacklist removal request previously and today received the approval reply, so yours should be good now.
jsburger wrote: Tue Jan 13, 2026 6:13 pm
jsburger wrote: Tue Jan 13, 2026 5:51 pm
jsburger wrote: Tue Jan 13, 2026 11:49 am

Thank you. I will also check with my provider.
OK, I contacted my provider and read them verbatim what you said. The totally understood the issue. However they can't do anything until they get your request. The IP address is shared (cloud VPS) and you have to give them verified information so they let the emails through. I may not have that exactly correct but I guess you know what has to be done.
Well, as soon as I posted the above I got an email notification. So I guess my provider did something while I was on the phone with them.
Shopsmith I.T.
User avatar
jsburger
Platinum Member
Posts: 6585
Joined: Fri Jul 21, 2006 4:06 pm
Location: Hooper, UT

Re: GREAT to have you back

Post by jsburger »

admin wrote: Tue Jan 13, 2026 8:49 pm I had put the blacklist removal request previously and today received the approval reply, so yours should be good now.
jsburger wrote: Tue Jan 13, 2026 6:13 pm
jsburger wrote: Tue Jan 13, 2026 5:51 pm

OK, I contacted my provider and read them verbatim what you said. The totally understood the issue. However they can't do anything until they get your request. The IP address is shared (cloud VPS) and you have to give them verified information so they let the emails through. I may not have that exactly correct but I guess you know what has to be done.
Well, as soon as I posted the above I got an email notification. So I guess my provider did something while I was on the phone with them.
Yes, it is so good to see you back and with the great response we used to have years ago
John & Mary Burger
Eagle's Lair Woodshop
Hooper, UT
User avatar
JPG
Platinum Member
Posts: 35600
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: GREAT to have you back

Post by JPG »

PTL! I am very much encouraged/impressed with what Andrew has stated in the 'interview' with Mark. I consider his mindset much more grounded. I think there is reason for hope.
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10
E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
User avatar
dusty
Platinum Member
Posts: 21530
Joined: Wed Nov 22, 2006 6:52 am
Location: Tucson (Wildcat Country), Arizona

Re: GREAT to have you back

Post by dusty »

This is GREAT. I am ashammed of the fact that I had lost faith. I was afraid that Shopsmith was gone.

Now we can only hope that the old community all comes back.

I did have some trouble logging it. Hope that was me fumble fingering the keyboard.
"Making Sawdust Safely"
Dusty
Sent from my Dell XPS using Firefox.
User avatar
chapmanruss
Platinum Member
Posts: 4551
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: GREAT to have you back

Post by chapmanruss »

dusty,

You were not alone thinking
I was afraid that Shopsmith was gone.
I am very glad to have it back along with the Forum.
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's, 2 Power Stations & Crafter's Station
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored.
User avatar
SteveMaryland
Gold Member
Posts: 227
Joined: Sat Nov 06, 2021 3:41 pm
Location: Baltimore, Maryland

Re: GREAT to have you back

Post by SteveMaryland »

Well, Lo and Behold! The Forum survived without a scratch. Just like Old Times. Great to be back.

My wish is that the reborn Shopsmith will focus on spare parts mfg and sales to the existing market. Must get Cash In.

Maybe also support rehab and resale of existing machines. More machines in use = more part and accessory sales.

I think new machine investment and sales would be a $$ bridge too far. Fix the Power Pro and leave it at that. Not enough potential new owners at the new-machine price point.

But what do I know? Thanks and best wishes to the new owner.
Mark V, Model 555510, Serial No. 102689, purchased November 1989. Upgraded to 520
Post Reply