Page 3 of 5
looks good
Posted: Sat Jul 25, 2009 9:09 pm
by dlbristol
Good work! I think you will like the white walls. I painted my walls white at the suggestion of some one on this forum. ( can't recall the name). It really made a difference in the way the lights work. It just makes it seem brighter and less like a cave.
Posted: Tue Jul 28, 2009 11:12 am
by mbcabinetmaker
[ATTACH]5383[/ATTACH]
The left wall is now complete. I thought I would post this picture, as it is the cleanest it will ever be.
Posted: Sun Aug 02, 2009 9:10 am
by mbcabinetmaker
Work continues and this week I pulled the last of the wires in the new wall. I also started organizing the portion of the back wall I now call the Shopsmith wall. What started out as one 8' bench turned into 2 92" benches.
[ATTACH]5406[/ATTACH]
The 520 is set up to dado the new SPT bench parts.
[ATTACH]5407[/ATTACH]
Unfortunatly the white wall treatment for this section will have to wait a while. AT $33.00 per sheet and another $7.00 for trim and glue it adds up fast. This will be the next section I will do
when/if work picks up.
[ATTACH]5408[/ATTACH]
[ATTACH]5409[/ATTACH]
[ATTACH]5410[/ATTACH]
I really like having a dedicated spot to store my 520 main table when not in use.
These are just the cases but getting all these pieces organized has helped the work flow. I will go back and build drawers and pullouts.
Posted: Sun Aug 02, 2009 9:36 am
by JPG
mbcabinetmaker wrote:Work continues and this week I pulled the last of the wires in the new wall. I also started organizing the portion of the back wall I now call the Shopsmith wall. What started out as one 8' bench turned into 2 92" benches . . .
I really like having a dedicated spot to store my 520 main table when not in use.
These are just the cases but getting all these pieces organized has helped the work flow. I will go back and build drawers and pullouts.
Looks GREAT!! What is what 'appears' to be a 500 with sanding/routing insert table used with?
Posted: Sun Aug 02, 2009 11:05 am
by mbcabinetmaker
JPG it is the table from my Mark 5 shorty. The last time I used it was with a 1 inch sanding drum.
Posted: Sun Aug 02, 2009 12:20 pm
by greitz
Looks fantastic! Did you purposely adjust the workbench height to minimize lifting of the SPT's?
Gary
Posted: Sun Aug 02, 2009 12:30 pm
by mbcabinetmaker
greitz
Yes I made it the same height as the Shopsmith to eliminate stooping and straining. I think it is going to work out great.
Posted: Sun Aug 02, 2009 12:35 pm
by JPG
mbcabinetmaker wrote:greitz
Yes I made it the same height as the Shopsmith to eliminate stooping and straining. I think it is going to work out great.
HEY! How about that! He listens!:)
One of life's simple pleasures.
Posted: Sun Aug 09, 2009 8:38 pm
by mbcabinetmaker
Work continues and I am flatting a drawer front the old fashion way. The planer is buried and the drum sander has a new home in Indiana. I sometimes get caught up in Production Mode and forget the pleasure of using hand tools.
[ATTACH]5504[/ATTACH]
All the new cabinets should be finished this coming week. I plan to go back later and apply a good coat of Watco Golden oak. That is what I did on my bench and it gives a nice aged look. It is also easy to just re-apply to help hide the Character marks.
Posted: Mon Aug 10, 2009 1:10 pm
by JPG
mbcabinetmaker wrote:Work continues and I am flatting a drawer front the old fashion way. The planer is buried and the drum sander has a new home in Indiana. I sometimes get caught up in Production Mode and forget the pleasure of using hand tools.
[ATTACH]5504[/ATTACH]
All the new cabinets should be finished this coming week. I plan to go back later and apply a good coat of Watco Golden oak. That is what I did on my bench and it gives a nice aged look. It is also easy to just re-apply to help hide the Character marks.
YES!!!! A well sharpened plane IS a pleasure to use.
How quickly we sometimes forget 'the old way'!;)
BTW Does 'Flatting' have any resemblance to 'flatulence'?:D