Page 3 of 3
Posted: Wed Aug 10, 2011 5:13 am
by rlkeeney
I have some of these. Using it for a fence on my bandsaw never occurred to me.
I read lots of posts about these before I bought mine. None were anywhere near as good as this one. Thanks for putting this together.
Posted: Wed Aug 10, 2011 7:47 am
by pennview
Regarding using one of these clamps as a bandsaw fence, if you have one of those double-sided models with a clamp on top as well as on the bottom, you can attach an "L" shaped fence to the upper clamp and make yourself a tall resaw fence.
Posted: Wed Aug 10, 2011 1:54 pm
by Ed in Tampa
Now dusty has made up a saw plate out of scrap to work with this clamp rather than messing around ordering I will just make a plate like dusty's
Dusty's can be seen in a thread titled when the scrap box gets full in the beginning woodworking subgroup.
Thanks Dusty!!!!
Posted: Wed Aug 10, 2011 7:05 pm
by dusty
JPG40504 wrote:Look like this except for the slide lock? Ciao = same folks! Make that the clamp faces, not the slide lock!!! I misunderstood what yer pic was!!:o
http://eemersontool.com/tips/tips.html
Ciao = ???
I suspect that the E. Emerson logo has been misread (two letters transposed).
I just received a pair of wide jaws for my U54 clamp. They came in a package labeled Caio followed by the words
All In One where the words were preceded by a C shaped arrow.
Posted: Wed Aug 10, 2011 7:46 pm
by JPG
dusty wrote:Ciao = ???
I suspect that the E. Emerson logo has been misread (two letters transposed).
I just received a pair of wide jaws for my U54 clamp. They came in a package labeled Caio followed by the words All In One where the words were preceded by a C shaped arrow.
WHOOPS CAIO All In One C=clamp???
Posted: Wed Aug 10, 2011 7:46 pm
by jcraigie
EEmerson and Caio are the same company (or very closely affiliated). If you go to their website at the top of the home page to the left of the Eemerson logo you will see the CIAO logo also - it's easy to miss.
http://www.eemersontool.com/
Posted: Wed Aug 10, 2011 7:50 pm
by JPG
jcraigie wrote:EEmerson and
Ciao are the same company (or very closely affiliated). If you go to their website at the top of the home page to the left of the Eemerson logo you will see the
CIAO logo also - it's easy to miss.
http://www.eemersontool.com/
Looks like I started something! S/B CAIO!!:o
Posted: Wed Aug 10, 2011 7:52 pm
by jcraigie
Whaaat?
I don't know what your talking about:o My spelling is perfect... after the 3rd edit:o
Posted: Thu Aug 11, 2011 12:32 pm
by Ed in Tampa
Momma always said if I could spell I could be presedent.
Posted: Thu Aug 11, 2011 5:56 pm
by JPG
Ed in Tampa wrote:Momma always said if I could spell I could be presedent.
Were you gonna rub as a Dokney or an epelhant!:D
I don't know what your talking about:o My spelling is perfect... after the 3rd edit:o