Heads Up - Bargain 'available'

Moderator: admin

Post Reply
GetterDone
Gold Member
Posts: 357
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Heads Up - Bargain 'available'

Post by GetterDone »

The drill chuck is on sale 50% off right now.

Link: https://www.shopsmith.com/product-page/ ... 311d3143d1
Dwayne

1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
Top
jpdalton
Gold Member
Posts: 477
Joined: Sun Jun 12, 2011 7:36 am

Re: Heads Up - Bargain 'available'

Post by jpdalton »

Vintage Mark VII 10” Combination Flat/Conical Sanding Disc

For anyone who might be interested in a Magna American classic, here’s a copy of the 10” flat and conical sanding disc that was standard with the Mark VII:

https://www.ebay.com/itm/126843575786
IMG_5191.jpeg
IMG_5191.jpeg (417.88 KiB) Viewed 40891 times
John Dalton
Massachusetts
*****************************************
1948 10E, S/N 5052 (restored)
1950 10ER, S/N 26473 (restored)
1952 10ER, S/N R51721 (restored as dedicated drill press)
1954 Mark 5, S/N 263705 (restored/PowerPro)
c1957 Magna-Line Model 710 Bench Saw, S/N 34162 (restored)
Top
GetterDone
Gold Member
Posts: 357
Joined: Sat Jul 20, 2024 3:45 pm
Location: TN

Re: Heads Up - Bargain 'available'

Post by GetterDone »

jpdalton wrote: ↑Sat Dec 21, 2024 3:59 pm Vintage Mark VII 10” Combination Flat/Conical Sanding Disc

For anyone who might be interested in a Magna American classic, here’s a copy of the 10” flat and conical sanding disc that was standard with the Mark VII:

https://www.ebay.com/itm/126843575786

IMG_5191.jpeg
Wow. :D

That went Quick. :)
Dwayne

1st Shopsmith Machine= SS Mark V /Jan./1984
2nd Shopsmith Machine= SS Mark V / Mar./1984
3rd Shopsmith Machine= SS Mark V / Jan./1981
4th Shopsmith Machine = SS Mark V (510) 50th anniversary
5th Shopsmith Machine = SS Mark V (510) Dec. 1996
6th Shopsmith Machine = SS Mark VII (1963 ???)
7th Shopsmith Machine = SS Mark V / Nov. 1984 (Double Quill Bearings)
8th Shopsmith Machine = SS Greenie / 1956
Shopsmith headstock only/ From Shopsmith/ June 1957
Top
edma194
Platinum Member
Posts: 2205
Joined: Fri Jun 19, 2020 4:08 pm

Re: Heads Up - Bargain 'available'

Post by edma194 »

GetterDone wrote: ↑Sat Dec 21, 2024 7:23 pm
jpdalton wrote: ↑Sat Dec 21, 2024 3:59 pm Vintage Mark VII 10” Combination Flat/Conical Sanding Disc

For anyone who might be interested in a Magna American classic, here’s a copy of the 10” flat and conical sanding disc that was standard with the Mark VII:

https://www.ebay.com/itm/126843575786

IMG_5191.jpeg
Wow. :D

That went Quick. :)
Yeah. My fault. Now if I can only find a Mark VII to put it on.
Ed from Rhode Island

510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Top
User avatar
JPG
Platinum Member
Posts: 35427
Joined: Wed Dec 10, 2008 7:42 pm
Location: Lexington, Ky (TAMECAT territory)

Re: Heads Up - Bargain 'available'

Post by JPG »

Ignore the fact that they were made for the Mark VII. They are a flat/conical 10" sanding disk. That means the ability to be used through the table slot. Also the required tilt to use the conical side is a smaller degree of table tilt.

I am revealing this since I now have all I will ever need. ;)
╔═══╗
╟JPG ╢
╚═══╝

Goldie(Bought New SN 377425)/4" jointer/6" beltsander/12" planer/stripsander/bandsaw/powerstation /Scroll saw/Jig saw /Craftsman 10" ras/Craftsman 6" thicknessplaner/ Dayton10"tablesaw(restoredfromneighborstrashpile)/ Mark VII restoration in 'progress'/ 10E[/size](SN E3779) restoration in progress, a 510 on the back burner and a growing pile of items to be eventually returned to useful life. - aka Red Grange
Top
MrPerfect
Bronze Member
Posts: 6
Joined: Thu Nov 21, 2024 9:31 pm

Re: Heads Up - Bargain 'available'

Post by MrPerfect »

edma194 wrote: ↑Sat Dec 21, 2024 7:26 pm Yeah. My fault. Now if I can only find a Mark VII to put it on.
https://www.facebook.com/marketplace/it ... 495060725/?
https://www.facebook.com/marketplace/it ... 481170159/?
https://www.facebook.com/marketplace/it ... 759910131/?
https://www.facebook.com/marketplace/it ... 765754000/?
Top
edma194
Platinum Member
Posts: 2205
Joined: Fri Jun 19, 2020 4:08 pm

Re: Heads Up - Bargain 'available'

Post by edma194 »

JPG wrote: ↑Sat Dec 21, 2024 7:47 pm Ignore the fact that they were made for the Mark VII. They are a flat/conical 10" sanding disk. That means the ability to be used through the table slot. Also the required tilt to use the conical side is a smaller degree of table tilt.

I am revealing this since I now have all I will ever need. ;)
Thanks. I did know about that from Scott Markwood's video on My Growth Rings about conical sanders. There are non-Shopsmith brands that can probably be mounted on a universal arbor. They vary in the angle and height of the sanding area. Recently purchased a current version Shopsmith conical sander though haven't had need for it yet I see it getting used soon since I avoid joiners when possible.
Ed from Rhode Island

510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Top
edma194
Platinum Member
Posts: 2205
Joined: Fri Jun 19, 2020 4:08 pm

Re: Heads Up - Bargain 'available'

Post by edma194 »

If you find one within 100 miles of Rhode Island please let me know. Even the one in NY is 5+ hours away.
Ed from Rhode Island

510 PowerPro Double Tilt:Greenie PowerPro Drill Press:500 Sanding Shorty w/Belt&Strip Sanders
Super Sawsmith 2000:Scroll Saw w/Stand:Joint-Matic:Power Station:Power Stand:Bandsaw:Joiner:Jigsaw
1961 Goldie:1960 Sawsmith RAS:10ER
Top
User avatar
chapmanruss
Platinum Member
Posts: 4184
Joined: Tue Aug 26, 2014 8:16 pm
Location: near Portland, Oregon

Re: Heads Up - Bargain 'available'

Post by chapmanruss »

One for sale outside of Portland Oregon in Sandy OR. Pictures were just added to this craigslist ad and it now shows a Mark V 500 with Bandsaw for $200.

https://portland.craigslist.org/clc/tls ... 10235.html

If I didn't have so many Shopsmith restoration projects waiting already I would get it myself.
Russ

Mark V completely upgraded to Mark 7
Mark V 520
All SPT's & 2 Power Stations
Model 10ER S/N R64000 first one I restored on bench w/ metal ends & retractable casters.
Has Speed Changer, 4E Jointer, Jig Saw with lamp, a complete set of original accessories & much more.
Model 10E's S/N's 1076 & 1077 oldest ones I have restored. Mark 2 S/N 85959 restored. Others to be restored.
Top
BobCoates1953
Gold Member
Posts: 107
Joined: Sun Jan 14, 2018 12:08 pm
Location: Norristown, Pa

Re: Heads Up - Bargain 'available'

Post by BobCoates1953 »

this near new london on criglist free Shopsmith with Bandsaw (Sterling)
https://newlondon.craigslist.org/zip/d/ ... 34642.html
Shopsmith Mark V Multipurpose Tool including Bandsaw Attachment.
Top
Post Reply

Return to “Community”