Page 5 of 7
Re: Drill Press Quill Retract ?
Posted: Thu Apr 07, 2016 1:44 pm
by dusty
oldiron wrote:I tried deleting the double post immediately after it went through however, It said I'm not able to delete a post from this forum.
How do you eliminate it at that point?
Mike
You should be able to delete at least one of them, unless some has commented on the post.
You are unable to delete a post that you generated IF it started a thread (this one did not). I don't know of a reason why you should not hace been able to delete.
Re: Drill Press Quill Retract ?
Posted: Thu Apr 07, 2016 9:08 pm
by oldiron
rjent wrote:Oldiron, if you don't have, or want, a Youtube account, I would be glad to upload it to mine. Email me the video and I will put it on my Youtube account if you want.
Dick,
After a rather rough day, I was able to make the video for the quill feed return spring however, I don't have it in me to get a YouTube account going tonight.
Pass along your email to me so I can send the video to you.
Mike
Re: Drill Press Quill Retract ?
Posted: Thu Apr 07, 2016 9:14 pm
by ERLover
I am just guessing, because I did not see what you did, but there is a question, why do you want to delete, and when I have done it, I type in double post. I dont know what you did because I was not sitting on your lap, but that is what I do.Then I think there is a question prompt, that ask you do you want to delete this post, and you have to click yes/procide, ect
Re: Drill Press Quill Retract ?
Posted: Thu Apr 07, 2016 9:16 pm
by JPG
I will try to 'demo'.
Re: Drill Press Quill Retract ?
Posted: Thu Apr 07, 2016 9:27 pm
by rjent
oldiron wrote:rjent wrote:Oldiron, if you don't have, or want, a Youtube account, I would be glad to upload it to mine. Email me the video and I will put it on my Youtube account if you want.
Dick,
After a rather rough day, I was able to make the video for the quill feed return spring however, I don't have it in me to get a YouTube account going tonight.
Pass along your email to me so I can send the video to you.
Mike
PM Sent
Re: Drill Press Quill Retract ?
Posted: Thu Apr 07, 2016 9:30 pm
by JPG
thread b4 delete
- delete demo 0.jpg (242.46 KiB) Viewed 1982 times
telling why
- delete demo 1.jpg (103.22 KiB) Viewed 1982 times
its done
- delete demo 2.jpg (73.32 KiB) Viewed 1982 times
Re: Drill Press Quill Retract ?
Posted: Thu Apr 07, 2016 9:32 pm
by oldiron
Okay Dick,
I have sent the video showing the quill feed return spring to your email. Let me know that it made it to you!
Thanks,
Mike
Re: Drill Press Quill Retract ?
Posted: Thu Apr 07, 2016 9:35 pm
by oldiron
Dick, It appears to be too large. I'm trying to channel it to Youtube.
Mike
Re: Drill Press Quill Retract ?
Posted: Thu Apr 07, 2016 9:57 pm
by ERLover
Thanks JPG, a perfect as always demo/explanation
.
Re: Drill Press Quill Retract ?
Posted: Thu Apr 07, 2016 10:03 pm
by oldiron
Well, I'm stuck with trying to upload the video to Youtube. Shows 0% uploaded.
Upload suspended...