2013 Christmas projects

JPG · Post by **JPG** » Tue Jan 14, 2014 1:17 pm

I hope they appreciate yer effort!

Good Job!

How about a 'closeup' of 'the label'?

I assume is says "hand made by . . . . . etc.).

danr · Post by **danr** » Tue Jan 14, 2014 2:13 pm

Yes, job well done
Dan

WmZiggy · Post by **WmZiggy** » Tue Jan 14, 2014 3:11 pm

JPG40504 wrote:I hope they appreciate yer effort!

Good Job!

How about a 'closeup' of 'the label'?

I assume is says "hand made by . . . . . etc.).

Here is the label I made on the computer.

[ATTACH]23771[/ATTACH]

Hand Made By:
W.M. Ziegler
January 2014

danr · Post by **danr** » Tue Jan 14, 2014 3:51 pm

WmZiggy wrote:Here is the label I made on the computer.

[ATTACH]23771[/ATTACH]

Great! Now you have inspired me to stop procrastinating

and make my own. Thanks,
Dan

SDSSmith · Post by **SDSSmith** » Fri Jan 17, 2014 6:08 pm

Walnut and maple cribbage board complete for daughter:

[ATTACH]23803[/ATTACH]

[ATTACH]23804[/ATTACH]

Earring case out of black walnut for my wife:

[ATTACH]23801[/ATTACH]

[ATTACH]23802[/ATTACH]

john · Post by **john** » Sat Jan 18, 2014 5:09 pm

Rob:

Nice Job on both items!

The earing case is particularly interesting.

John

benush26 · Post by **benush26** » Sat Jan 18, 2014 6:32 pm

Rob,
I really like the earring case. May try one to give as a gift. I guess actually I'll see how well the one I make turns out to determine if it becomes a gift or hides on the back shelf.

However, what has me REALLY curious is the background. The blade looks bigger than 10" considering how high it is sticking out of the Miter Express and then the four foot level behind.

. May I ask what you were doing with that configuration?:eek:

Be well,
Ben

SDSSmith · Post by **SDSSmith** » Sat Jan 18, 2014 11:46 pm

benush26 wrote:Rob,
I really like the earring case. May try one to give as a gift. I guess actually I'll see how well the one I make turns out to determine if it becomes a gift or hides on the back shelf.

However, what has me REALLY curious is the background. The blade looks bigger than 10" considering how high it is sticking out of the Miter Express and then the four foot level behind. . May I ask what you were doing with that configuration?:eek:

Be well,
Ben

Just a 10" blade....must be the angle. The level was there to help me level the infeed floater with the Mark V worktable in drill press mode. I was drilling another cribbage board for my sister using an incra positioner as in the following picture.

In fact this worked so slick, this time I drilled the floater so I could use bolts to hold the positioner instead of the clamps.

benush26 · Post by **benush26** » Sun Jan 19, 2014 1:54 am

SDSSmith wrote:Just a 10" blade....must be the angle. The level was there to help me level the infeed floater with the Mark V worktable in drill press mode. I was drilling another cribbage board for my sister using an incra positioner as in the following picture.

In fact this worked so slick, this time I drilled the floater so I could use bolts to hold the positioner instead of the clamps.

That is a slick set up!!

I have a friend making the extension tube holders (couldn't find them on the SS site and a friend has pieces of aluminum plate too small for his project but just right for the holders)

I have to admit when I think of making a cribbage board I think of cheating and buying the plastic drilling templates

Thanks for the photo. It has given me another idea!

Be well,
Ben

JPG · Post by **JPG** » Sun Jan 19, 2014 11:33 am

benush26 wrote: . . .
Thanks for the photo. It has given me another idea!

Be well,
Ben

8 spacer blocks oughta do it!

+ 2 for the row spacing.

Another peg for a lap counter would be 'nice'.]http://www.shopsmith.com/ownersite/cata ... system.htm[/url]

Shopsmith Forums

2013 Christmas projects

Cribbage board, Earing case