Shopsmith Forums

Posted: **Tue Jan 06, 2015 8:56 am**

Can't wait to see what you are going to do with that glued up block of wood.

Posted: **Tue Jan 06, 2015 10:09 am**

mountainbreeze wrote:Can't wait to see what you are going to do with that glued up block of wood.

Here's a hint. The glue ups go with 16 of these.

: P1090258 (1024x768).jpg (355.51 KiB) Viewed 13447 times

Posted: **Tue Jan 06, 2015 11:28 am**

Anyone else having problems--- not seeing the images? I'm surfing with an iPad this morning.

Posted: **Tue Jan 06, 2015 12:09 pm**

Yes, the Forum Gremlins have eaten the pics again.

Posted: **Tue Jan 06, 2015 2:26 pm**

: P1090258 (1024x768).jpg (355.51 KiB) Viewed 13399 times

I have a gremlin of my own to report.

I have the image that rcplaneguy seems to be missing

but I responded earlier to this post and it is not here now.

Mark's comment was:

"The glue up goes with 16 of these".

I am guessing and I said this in the missing post that this is one of 16 "face frames".

Posted: **Tue Jan 06, 2015 9:27 pm**

: Need a longer jointer? The HD flip stops work very well.; 2 (2).jpg (469.15 KiB) Viewed 13332 times

: They also work for the planer.; 2 (1).jpg (437.7 KiB) Viewed 13332 times

: 3.jpg (392.41 KiB) Viewed 13332 times

I hate when this happens. Funny thing is the front bags has always fill up first so that is the one I keep a check on. Recently I added a port and blast gate to this collector so I must have changed the dynamics.

: 4.jpg (443.36 KiB) Viewed 13332 times

I hated even more when I discovered these nails (16 total) in the glue ups I was planing. See all the grooves. The knives are shot.

: 5.jpg (366.32 KiB) Viewed 13332 times

These are the tools I need to change the knives on my Tersa cutterhead. The allen wrench is to remove the homemade guard over the mortise head made by my alter ego mbmetalworker.

: You just tap the jibs down with the block and mallet.; 6.jpg (400.63 KiB) Viewed 13332 times

: The knives slide right out. They are double sided so they can be flipped over. Unfortunately these have already been flipped.; 7.jpg (383.89 KiB) Viewed 13332 times

: This is a close up of the profile. It takes less than 2 minuets to change these out. Centrifugal force resets the jibs when the unit is power back on.; 8.jpg (337.05 KiB) Viewed 13332 times

I see the pictures are down again. I hope I have all of these in order!

Posted: **Tue Jan 06, 2015 11:24 pm**

Only the planer and jointer pix are flipped.

Posted: **Wed Jan 07, 2015 6:42 am**

JPG wrote:Only the planer and jointer pix are flipped.

Fixed.

Posted: **Wed Jan 07, 2015 7:56 am**

"This is a close up of the profile. It takes less than 2 minuets to change these out. Centrifugal force resets the jibs when the unit is power back on."

WOW. Yesterday I lost 6 hours of my life that I'll never get back changing the blades(new set) in my Shopsmith planer.

I used Nick's video (over and over). Finally got them within 4 thousands +- I could not get/use his 132/1000 spacing with a new set. With the blades completely set in the head, I was already above that.

So they are now in and today I'll try it out.

Posted: **Wed Jan 07, 2015 8:07 am**

"2 minuets"

Shopsmith Forums

Occasionally In The Shop

Re: Occasionally In The Shop

Re: Occasionally In The Shop

Re: Occasionally In The Shop

Re: Occasionally In The Shop

Re: Occasionally In The Shop

Re: Occasionally In The Shop

Re: Occasionally In The Shop

Re: Occasionally In The Shop

Re: Occasionally In The Shop

Re: Occasionally In The Shop