Page 7 of 7
Re: Cart for Special Purpose Tools
Posted: Fri Sep 12, 2025 8:07 am
by dusty
Excellent job. . My shop would be much better if I had one but I'll not be doing that at my age (86).
Re: Cart for Special Purpose Tools
Posted: Sun Apr 12, 2026 2:18 pm
by HopefulSSer
HopefulSSer wrote: Fri Sep 05, 2025 7:21 am
I decided to build one of these. Thanks for the plans!
IMG_1331.jpeg
UPDATE: I modified the belt sander storage a tiny bit. The original plans put a small strip of wood on the top to keep the belt sander from sliding off the back of the cart. (Circled)
- Screenshot 2026-04-12 at 2.12.40 PM.png (400.77 KiB) Viewed 7314 times
However, I found that it still slid off towards the side, especially when I habitually grab it to try to move the cart and inadvertently pull it off. So, with the belt sander in place, I marked for two 3/8" holes to align with the holes in the miter slot on the table. Then I glued two short dowels into the top, just long enough to stick up through the holes in the table. Now the sander cannot move in either direction
- IMG_2051.jpeg (381.05 KiB) Viewed 7136 times
Re: Cart for Special Purpose Tools
Posted: Fri May 08, 2026 2:43 am
by WeekendWoodworker
Looks great — really clean build.