Shopsmith Forums

Watch it here: https://www.youtube.com/watch?v=OvfKgNt ... B&index=41

In this video, I answer your Questions, Comments, and Cheap-Shots from the weekend's video on "Don’t Burn Down Your Shop: Safe Rust Prevention with Oil-Based Polyurethane, H2O Poly or Penetrol". If you missed it, catch it here: https://youtu.be/FnTPtNAwREI

Here's the video by Nick Engler that was mentioned in this vid, where he made an extension for the outfeed table of his Shopsmith Jointer: https://youtu.be/ZxAd-t2VBV0

0:00 - Intro
0:31 - Why polyurethane my cast iron tools?
3:39 - Forgot to mention the 50/50 cut
3:55 - Yes, Penetrol soaked rags can spontaneously combust!
4:18 - Nick's Shopsmith Jointer Outfeed Extension
5:41 - Yes, Penetrol can be used on bare metal
5:52 - Do you really need a Jointer?
6:45 - Waxing the Jointer with Johnson Past Wax and CRC 3-36
9:00 - Reinstalling the Feather Guard
9:12 - How to install the Shopsmith Jointer Fence
10:20 - Using and Adjusting the Jointer Fence
11:35 - A tip for safe jointing
12:41 - Connecting the Jointer to the headstock
13:14 - Edge jointing with the Shopsmith 4" Jointer

Products used or discussed in this video (in no particular order):
CRC 3-36 Spray Lube & Corrosion Inhibitor: https://amzn.to/32cnmJE
Boeshield spray wax: https://amzn.to/3mvXSi7
Nick Engler's books (And there are a TON of them!): https://amzn.to/2HOah1G
Here's the wax I use: https://amzn.to/2VJx9np You can get it on Amazon, but you'll save some money if you drop by your local hardware store or home center.

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com
and http://shopsmith-tool-hunter.blogspot...

Disclaimer/Disclosure:
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. As an Amazon Associate and an eBay affiliate, I may earn a commission from qualifying purchases. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!

#ShopsmithJointer #Shopsmith #EdgeJointing

Watch it here: https://www.youtube.com/watch?v=tSpYlXF ... B&index=42

The Shopsmith Headstock and Carriage lock are cool little mechanical marvels, but they might not work quite as you expect. In this video, I'll walk through their use and tell you about an issue I had with my jointer right after I turned the camera off last week.

Here's "The Shopsmith Mark V 5-Point Safety Check (+1)" video: https://youtu.be/Y2DApzMn2yg

Products used in this video (in no particular order):
- "Shopsmith Toolbox" AKA: Long 5/32 Inch Cushion Grip Hex T-Handle T-Key Allen (hex) wrench: https://amzn.to/3n5iezc
- Powdered Graphite: https://amzn.to/3kbTpj1

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com and http://shopsmith-tool-hunter.blogspot...

Also, join me on the Shopsmith Forums at: https://forum.shopsmith.com/
And in the Shopsmith Owners Facebook Group at: https://www.facebook.com/groups/68446...

DISCLAIMER:
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. As an Amazon Associate and an eBay affiliate I may earn a commission from qualifying purchases. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!

#ShopsmithJointerFence #ShopsmithHeadstockLock #ShopsmithCarriageLock

Watch it here: https://www.youtube.com/watch?v=LZs9qPn ... B&index=43

In this video, I answer your Questions, Comments, and Cheap-Shots from the weekend's video on "Shopsmith Headstock Lock, Carriage Lock & Jointer Fence Mysteries SOLVED!" If you missed it, catch it here: https://youtu.be/tSpYlXFoJ10

LINKS to products that were discussed in this video (in no particular order):
- ZEROPLAY Miter Bar from MicroJig: https://amzn.to/36yLQOS
- Genuine Shopsmith brand 5/8" saw arbor for Mark V model 505/510/520 Mark 1 and Mark 7: https://amzn.to/32BqWNU
- Genuine Shopsmith brand 1 1/4" saw arbor for Mark V model 505/510/520 Mark 1 and Mark 7: https://amzn.to/3eOzcip
- Aftermarket 5/8" saw arbor for Mark V model 505/510/520 Mark 1 and Mark 7: http://ebay.us/5J6evi
- Used misc Shopsmith arbors on eBay: http://ebay.us/g7VaKv

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com and http://shopsmith-tool-hunter.blogspot...

Also, join me on the Shopsmith Forums at: https://forum.shopsmith.com/
And in the Shopsmith Owners Facebook Group at: https://www.facebook.com/groups/68446...

0:00 - Intro
0:22 - Welcome 824 New Subscribers!
1:03 - Replace headstock lock without removing headstock?
1:58 - Mark V table tilt lock problems
5:30 - Why aren't Shopsmith miter slot and saw arbor "standard" size?
8:13 - Yeah, I know some stuff
8:44 - Another Jointer fence rail issue

DISCLAIMER:
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. As an Amazon Associate and an eBay affiliate, I may earn a commission from qualifying purchases. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!

#Stumped #ShopsmithHeadstockLock #ShopsmithCarriageLock

Watch it here: https://www.youtube.com/watch?v=UT6vfZsJ7OI

Every 25 hours of run-time your Shopsmith Mark V's headstock needs to be oiled in two places. This can be done with the headstock on the machine, but to make this a little easier to film and to show how easy it really is to remove for more in-depth maintenance, we'll go ahead and pull the headstock off. While it's off we'll pull the V-Belt, just to show how easy that is, for the day when you'll eventually need to replace yours.

Products used in this video (in no particular order):
- Here's the oil I use to lubricate the sheaves: https://amzn.to/32IkpAQ
- "Shopsmith Toolbox" AKA: Long 5/32 Inch Cushion Grip Hex T-Handle T-Key Allen (hex) wrench: https://amzn.to/3n5iezc
- Powdered Graphite: https://amzn.to/3kbTpj1
- Small magnetic parts tray: https://amzn.to/32K5shy
- Super-handy magnetic base flexible gooseneck LED light: https://amzn.to/3pyb20z (Pair) https://amzn.to/2IHis0C (Single)

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com and http://shopsmith-tool-hunter.blogspot...

Also, join me on the Shopsmith Forums at: https://forum.shopsmith.com/ Where I am "thedovetailjoint"
And in the Shopsmith Owners Facebook Group at: https://www.facebook.com/groups/68446... where I am "Scott Markwood"

DISCLAIMER:
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. As an Amazon Associate and an eBay affiliate, I may earn a commission from qualifying purchases. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!

#ShopsmithMaintainance #ShopsmithHeadstock #Shopsmith

I was wondering why the arthritis in my knuckles was acting up and then I remember the workout they got from that stupid floating sheave! Just goes to confirm to me that this new-to-me Mark V wasn't very well taken care of. It has a good home now, though. Scott

Basically opened the boxes and assembled it. Never setup or aligned properly. Never oiled or cleaned. Maybe waxed? "This thing won't cut right, it's a piece of junk! Sell it."

Then Mr. Tool-Hunter comes along...

What all did it come with, besides the basic machine, if you don't mind me asking, Scott?

This 520 came with about half of the standard components, such as the tie bar guard, the drill chick and key, wrenches, etc. were missing. It also had a jointer and a bandsaw, which both were a mess! You may also notice that not only was the jointer covered in rust and with a loose fence rail but the tables on the Mark V itself have big patches of some form or tarnish. It's not consistent, so I suspect he left a wet rag or something on it. Slowly but surely I'm bringing it back, though. Scott

I'm still searching for a 510. It'd been nice it came with a bandsaw and jointer. A 50th. anniversary model would be great to own. The closest I came to buying one was a 505, 50th anniversary model with a bandsaw and jointer, and was about 5 hours from home. Doing the math I just couldn't justify it. I passed on it, and not too regrettably now that I think back about it.

Watch it here: https://www.youtube.com/watch?v=awESOE8 ... B&index=45

In this video, I answer your Questions, Comments, and Cheap-Shots from the weekend's video on "Removing & Lubricating a Shopsmith Mark V Headstock & V-Belt (Critical 25 Hour Run-Time Maintenance)" If you missed it, catch it here: https://youtu.be/UT6vfZsJ7OI

LINKS to products that were discussed in this video (in no particular order):
Products used in this video (in no particular order):
- Here's the oil I use to lubricate the sheaves: https://amzn.to/32IkpAQ
- Powdered Graphite for the headstock lock: https://amzn.to/3kbTpj1
- Super Lube Dry Film Lubricant, for the Quadrant "Pork Chop"): https://amzn.to/35IToza
- CRC 3-36 Multi-Purpose Lubricant, for coating before storage: https://amzn.to/3ff5umA
- Johnson's Paste Wax, for tables and way tubes: https://amzn.to/2IS5Zr3
- Glidecoat (Formerly TopCoat) for quick lube of tables and way tubes: https://amzn.to/3kO6grT
- Boeshield T-9, for quick lube of tables and way tubes: https://amzn.to/2Hi4qlC

Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com and http://shopsmith-tool-hunter.blogspot...

Also, join me on the Shopsmith Forums at https://forum.shopsmith.com/
And in the Shopsmith Owners Facebook Group at https://www.facebook.com/groups/68446...

0:00 - Intro
0:59 - 50 yours with no maintenance
1:10 - Which oil should you use in the Shopsmith headstock?
1:50 - That's right, I'm a Horologist!
3:10 - Misaligned Headstock lock wedges?
3:53 - And oil in the Drill Press position
5:44 - Lubricating of the "Pork Chop"
8:03 - What are all the "Lubes" used in and on the Shopsmith Mark V?
10:38 - How will I replace the broken quill handle? Upgrade!
11:28 - Are the Shopsmith's ball bearings common sizes?
11:55 Two more lubricants I use with the Mark V

DISCLAIMER:
A few viewers have requested I provide affiliate links to help them find the products I use and as a way of supporting the channel through commission. If you purchase a product or service with the links I provide, there is no additional charge to you. As an Amazon Associate and an eBay affiliate, I may earn a commission from qualifying purchases. I always recommend shopping around for a better price. Thank you for supporting My Growth Rings!

#Stumped #ShopsmithHeadstockLock #ShopsmithMaintenance

Watch it here: https://www.youtube.com/watch?v=lG98aOO ... B&index=46

Just a Shop Short
Visit http://www.MyGrowthRings.com
Follow on Instagram @MyGrowthRings
I also blog at http://www.tool-hunter.com and http://shopsmith-tool-hunter.blogspot...

Also, join me on the Shopsmith Forums at https://forum.shopsmith.com/
And in the Shopsmith Owners Facebook Group at https://www.facebook.com/groups/68446...