Shopsmith Forums

Posted: **Sun Aug 12, 2012 9:52 pm**

Bought a used SS Jointer Auxiliary Fence and the bolt holes for mounting it to the cast iron SS jointer fence don't line up.

There only seems to be one model of this fence.

I can use either the front hole (left) or the rear hole (right) to mount it to the fence.

Any idea why?

Posted: **Sun Aug 12, 2012 11:09 pm**

Probably due to the age of the jointer. Aux fence came later. Bore a new hole in the Aux fence.

Posted: **Mon Aug 13, 2012 9:41 pm**

Right. another hole. But thought there might be a different version or some other explanation.

Posted: **Mon Aug 13, 2012 10:23 pm**

If you have Mark 5 of a '500/510', the holes align with holes in the rip fence. Using the aux fence with the jointer was an 'after thought'. Also IIRC there are different jointer fence hole versions.

Posted: **Tue Aug 14, 2012 10:25 am**

JPG40504 had the best answer. Thanks everyone!

Shopsmith Forums

Used Jointer Auxiliary Fence Bolt Holes don't line up with my SS jointer fence holes.

Used Jointer Auxiliary Fence Bolt Holes don't line up with my SS jointer fence holes.