Page 1 of 1
lathe work
Posted: Mon Nov 26, 2012 8:56 pm
by farley
back in the shop trying to get the swing of things.
couple of turned pieces here.
like my new universal tool rest from SS, but don't like how it keeps me further away from the tail stock more than the stock tool rest.
Posted: Mon Nov 26, 2012 9:10 pm
by mrhart
Very nice, what wood is the dark one in the middle?
Posted: Mon Nov 26, 2012 9:12 pm
by farley
black walnut
Posted: Tue Nov 27, 2012 11:16 am
by damagi
farley wrote:like my new universal tool rest from SS, but don't like how it keeps me further away from the tail stock more than the stock tool rest.
MT2 extension might help
Posted: Tue Nov 27, 2012 11:23 am
by terrydowning
Why must you be further from the tail stock? I've never seen a UTR up close, so I have no Idea, Just curious.
Posted: Tue Nov 27, 2012 11:27 am
by farley
I want to be closer to the tail stock, but the banjo base is bigger than the stock tool rest base so even with using the quill some smaller projects that you want both head and tail stock support- it doesn't reach.
I have a larger live center for the tail, i got from SS that helps, but really not enough.
Posted: Tue Nov 27, 2012 2:17 pm
by JPG
farley wrote:I want to be closer to the tail stock, but the banjo base is bigger than the stock tool rest base so even with using the quill some smaller projects that you want both head and tail stock support- it doesn't reach.
I have a larger live center for the tail, i got from SS that helps, but really not enough.
The lathe duplicator comes with an extension for the live center. CS may be able to get you one(or two).
It extends the center an additional 1 1/2 ".