Shopsmith Forums

Spotted an SS with an accessory that I can't identify, but has several things that I would like to have. Already have one up for sale from my last hopefully free upgrade to my keeper. Trying to decide if I want to pop on this one for more upgrades.

To what is the saw blade attached?

I can go with Henele on the Grinder set up for Q#1

I had assumed quickly and at an early hour that Item #2 would be the grinder set up so if not, then shaper guard?

Nice clear pics would be a plus!

Here is what I see.

Model 500 table.
Miter gauge w/o hold down mechanism
Miter gauge extension fence
Three of saw blade arbors with blades
Sanding disc
Push stick
Feather board
Push block (sliding fence version)
Grinding wheel safety guard
Saw blade guard

I think you are seeing the saw blade arbor resting in the well for the Grinding Wheel Guard where it connects to the quill on the headstock... I don't see anything unknown/unusual in the picture.

http://www.shopsmith.com/ownersite/cata ... lguard.htm

The guard is upside down and facing away from the camera so you are seeing the back side... Also the writing on the box says "Grinding Wheel Guard Accessories".

Pix #2 - Don't forget the /shaper knives, Shaper shield, and router chucks. Lathe tool rest, and drill chuck,all sitting on a jointer.

Is it an optical allusion, or does that jointer look extra wide?

Jack Wilson wrote:Is it an optical allusion, or does that jointer look extra wide?

No, only half as long.

That looks like the left side of a jointer, not the whole thing.

steve

Jack Wilson wrote:Is it an optical allusion, or does that jointer look extra wide?

I would guess a brand X 6" jointer.

JPG40504 wrote:I would guess a brand X 6" jointer.

I agree - that does not look like a SS jointer to me

I think it's a total shop jointer.

joshh wrote:I think it's a total shop jointer.

Not I!!!!!!!!!!;)