Page 1 of 1
Is this normal?
Posted: Tue Nov 12, 2013 8:57 am
by dcohenour
Hi All,
I also found this (see attached)
It looks like some kind of repair was done, unless this is normal. Any ideas?
Thanks!
Posted: Tue Nov 12, 2013 9:05 am
by enyoc
Not normal.
Posted: Tue Nov 12, 2013 10:06 am
by peterm
That is a pretty good looking repair effort. It is the first one I have seen pictured here.
I would have left a bigger gap at the bolt, but not bad at all!
Here is a side by side comparison:
[ATTACH]23242[/ATTACH]
BTW, it looks like possibly both tabs are broken?
Posted: Tue Nov 12, 2013 11:01 am
by dcohenour
Woah! Thanks guys!
Posted: Tue Nov 12, 2013 11:47 am
by billmayo
Add a 3/4" washer and screw in the existing hole above the eccentric bushing and you should be OK. Not pretty but looks functional. First time I have seen this type of repair. I was unsuccessful brazing or welding the ear back on the headstock casing so I have been scraping any headstock casing with a broken ear. My first thought would be to extend the bolt through the other web to provide more force on the eccentric bushing with the added bracket. Another idea to add to my collection. Contact me if you wish to replace the headstock casing. Thanks.