Page 203 of 241
Re: Heads Up - Bargain 'available'
Posted: Mon Jul 05, 2021 12:28 pm
by wvthomas
Facebook Marketplace - Sulphur Springs TX - Price drop from $1800 to $1200
https://www.facebook.com/marketplace/it ... 088e0d3f19
510, planer, bandsaw, scroll saw, joiner, tenon jig, power station.
Re: Heads Up - Bargain 'available'
Posted: Mon Jul 05, 2021 1:22 pm
by edma194
wvthomas wrote: ↑Mon Jul 05, 2021 12:28 pm
- Price drop from $1800 to $1200
Noticed several machines on Craig's List dropping in price. I think people hope to get a good price in the spring but understanding the reality by summer time. By the fall they'll go even in lower.
Here's one that just popped up from a Craig's List alert while I've been writing this post, a 500 with extras, looks like the headstock was replaced and has the old parts too, down to $300 from $350 originally. Pretty good deal for a starter machine or if you want a second one.
https://boston.craigslist.org/sob/tls/d ... 23339.html
Re: Heads Up - Bargain 'available'
Posted: Mon Jul 05, 2021 3:50 pm
by thunderbirdbat
Re: Heads Up - Bargain 'available'
Posted: Sun Jul 11, 2021 12:28 pm
by JPG
RE: Heads up Bargin Available
Posted: Sun Jul 18, 2021 12:09 pm
by ssmall
We need more room in our garage, sadly we must sell our overhauled Greenie.
All said & done we had slightly over $1,000 in new ShopSmith parts for the overhaul. (fully documented on the ShopSmith Maintance fourm
viewtopic.php?f=10&t=23864)
The Greenie works well but we need the room it currently occupies.
Details: Working condition greenie mark 5 shopsmith. Recently had all belts and bearings replaced. New 12 ga. (20 amp) electrical cord 15 feet in length for greater access to 110v electrical outlets. All parts were dissassembled, cleaned & inspected and replaced if found damaged.
Included parts are: extension table, rip fence, tool rest arm, lathe tool rest, lathe turning tool set, 2 circular saw blades, sanding disc, Jig Saw attachment,Planer attachment and tailstock.
We are located right off Interstate 81 on the Pennsylvaina side of the PA MD border.
Asking $400 O.B.O.
Thank you for your intrest.
Shawn
- Greenie 1.JPG (85.99 KiB) Viewed 1337 times
- Greenie accessories 1.JPG (285.86 KiB) Viewed 1346 times
- Accessories 2.JPG (339.22 KiB) Viewed 1346 times
Re: Heads Up - Bargain 'available'
Posted: Sun Jul 18, 2021 3:05 pm
by JPG
Good Luck and sorry it is necessary.
Anyone interested should PM Ssmall.
Re: Heads Up - Bargain 'available'
Posted: Thu Jul 22, 2021 4:33 pm
by edma194
This one is certainly a bargain if you need parts or have a few extras. Only $50 for the machine. Located in Maine though. Too close to the Arctic Circle for me.
https://maine.craigslist.org/tls/d/manc ... 38756.html
Re: Heads Up - Bargain 'available'
Posted: Sun Jul 25, 2021 2:18 pm
by thunderbirdbat
Re: Heads Up - Bargain 'available'
Posted: Sun Jul 25, 2021 11:12 pm
by Majones1
$50 for what they call “ShopSmith”, and it’s a bad angle photo, but looks like it may be an Overarm Pin Router to me. In Riverside, California, which is a couple hours north of San Diego and east of Los Angeles.
https://inlandempire.craigslist.org/tls ... 56699.html
Re: Heads Up - Bargain 'available'
Posted: Mon Jul 26, 2021 9:51 am
by JPG
Appears to include the router.
Go Get it!