Page 214 of 239
Re: Heads Up - Bargain 'available'
Posted: Tue Nov 02, 2021 12:49 pm
by chapmanruss
A demo unit and the accessory board is part of a display that would sit behind it. Below is a picture of the complete display.
_
- 1.jpg (38.59 KiB) Viewed 4491 times
Re: Heads Up - Bargain 'available'
Posted: Tue Nov 09, 2021 2:26 pm
by Majones1
Can't get a better deal than "free". Will likely go fast. Mark 5 500, includes a bandsaw with an aluminum table. It is located just east of Irvine, CA.
https://orangecounty.craigslist.org/tls ... 98434.html
Re: Heads Up - Bargain 'available'
Posted: Wed Nov 10, 2021 3:48 pm
by JPG
ALREADY GONE!
Re: Heads Up - Bargain 'available'
Posted: Wed Nov 10, 2021 4:53 pm
by Majones1
JPG wrote: ↑Wed Nov 10, 2021 3:48 pmALREADY GONE!
Not surprising. I figured it would go quickly, so I posted immediately after I received the e-mail notification of it. I assumed it would be gone within hours, if not minutes, so I half-assumed it might even be gone by the time I finished posting here.
Re: Heads Up - Bargain 'available'
Posted: Fri Nov 12, 2021 6:54 pm
by Majones1
ShopSmith Crafter's Station for $595. Includes a 1-1/2 hp motor, 510 floating and extension tables, with support tubes.
I don't know if this is a bargain or not, but I don't think they show up very often.
https://losangeles.craigslist.org/sgv/t ... 45378.html
.
- ShopSmith Crafter's Station.jpg (34.3 KiB) Viewed 4359 times
Re: Heads Up - Bargain 'available'
Posted: Fri Nov 12, 2021 6:58 pm
by bainin
Pro-Planer been gathering rust outdoors $150 near Raleigh NC
https://raleigh.craigslist.org/tls/d/ca ... 27410.html
b
Re: Heads Up - Bargain 'available'
Posted: Sat Nov 13, 2021 5:19 pm
by Majones1
510 in South Orange County, California, with bandsaw and DC-3300, for $425. It looks like it is in excellent condition. I suspect this will go pretty fast too.
https://orangecounty.craigslist.org/tls ... 01273.html
.
- 20F14987-728A-4B16-B987-2D03A8F79E60.jpeg (223.96 KiB) Viewed 4279 times
.
Re: Heads Up - Bargain 'available'
Posted: Sun Nov 14, 2021 12:57 pm
by chapmanruss
This Model 10E caught my eye. For sale in San Francisco CA. It is not in very good shape but it is because of what is included that I am posting it. It has the Fence Back Lock Assembly that adds the rear lock to the first Model 10E fence that did not have a rear lock. An item not often seen. Besides that it has a Speed Changer and Shopsmith Metal Bench Ends with retractable casters.
https://www.ebay.com/itm/265404492777?h ... Sw4h1hkGlj
Re: Heads Up - Bargain 'available'
Posted: Wed Nov 17, 2021 1:28 am
by Majones1
This 10E will probably go fast, only $80. Looks decent and has a lot of accessories, including a broken speed changer with an extra floating sheaves.
https://losangeles.craigslist.org/sfv/t ... 22209.html
- CE24EBA9-F22E-4B33-88B1-C7E14109A04A.jpeg (291.66 KiB) Viewed 4099 times
Bargain 'available': 510, Bandsaw, Pro Planer $699 (Dallas)
Posted: Wed Nov 24, 2021 6:42 am
by br549
https://dallas.craigslist.org/dal/tls/d ... 33021.html
Needs some assembly and TLC, but could be a good buy for someone.
Price has already been reduced from (I think) $850 since first listed a few days ago.
This is one of those cases where searching Craigslist for Shop Smith (2 words) finds you things most people don't see.