Page 1 of 1
jointer blades
Posted: Mon Mar 09, 2015 10:05 pm
by scottyrg
Can anybody tell me what size jointer knives I need for total shop 6" jointer?
Re: jointer blades
Posted: Mon Mar 09, 2015 11:56 pm
by beeg
General Contractor
Posted: Tue Mar 10, 2015 6:53 am
by Contractor
I have to say that for the last few of hours i have been hooked by the impressive articles on this blog. Keep up the good work. post, thanks for your help in advance
Re: jointer blades
Posted: Tue Mar 10, 2015 2:01 pm
by scottyrg
Thanks for the reply but the total shop isn't listed. I need to know the deminsions of the knives to find a set that will work. I bought the machine with no blades in it and don't know what size goes in it.
Re: jointer blades
Posted: Tue Mar 10, 2015 3:54 pm
by reible
A quick search here brought up this posting:
http://www.shopsmith.com/ss_forum/viewt ... +6+jointer
If you read down a couple of posts to the one from Bill Mayo. At that time he had a set of blades, no idea if that offer still stands...
Ed
Re: jointer blades
Posted: Tue Mar 10, 2015 10:27 pm
by billmayo
I have 2 sets of 3 6" joiner blades left over from Total Shop joiners. One set is 093" (2.88mm) wide and .553" (14.9 mm) high and the other set is .125" (3.12mm) wide and .619" (15.75mm) high. Both sets are the same thickness from top to bottom and have been sharpen.
Re: jointer blades
Posted: Wed Mar 11, 2015 12:34 am
by scottyrg
How much you want for them and how to purchase them bill.