Page 1 of 2
Missing standard parts
Posted: Mon Apr 13, 2015 11:30 pm
by ExtraMile
So, I come to find out that my Mark V has several parts missing on it, that were standard operational parts. A.)Shopsmith Power Coupler. B.)Lathe Drive Center. C.)Tailstock Live Center. D.)Precision Drill Chuck and Key
E.)A bracket that attaches the guard to the table saw.
So tomorrow, I will be calling Shopsmith to order all of these.
Perhaps the best thing is, that the former owners son is willing to split the cost 50/50 with me!
Re: Missing standard parts
Posted: Tue Apr 14, 2015 1:30 am
by benush26
re: Letter C
I am relatively certain they came with a dead center but not live center. Granted the live center is something which would have been nice, however live center is an option. Even the new Mark 7s only come with a dead center.
Be well,
Ben
Re: Missing standard parts
Posted: Tue Apr 14, 2015 9:00 pm
by ExtraMile
Deleted this to add to the bottom of thread.
Re: Missing standard parts
Posted: Tue Apr 14, 2015 9:02 pm
by ExtraMile
Update: the power coupler has been located.
Question:
Posted: Wed Apr 15, 2015 10:14 am
by ExtraMile
Does anyone have spare parts from the Mark V's of the earlier era (30+) years old? I have a upper table saw guard (metal), that is missing its "splitter and the anti-kick back fingers!
I do not wish to buy the upgrade, to the new acrylic/pvc "upper/lower" guard set up!
My heavens, $220+
Please advise!
Re: Missing standard parts
Posted: Wed Apr 15, 2015 7:25 pm
by roy_okc
Recommend you start watching eBay for those kind of parts. There are some folks who apparently buy whole machines and disassemble and sell components. Such as here:
http://www.ebay.com/itm/Shopsmith-Mark- ... 4637e11c18.
Re: Missing standard parts
Posted: Thu Apr 16, 2015 12:40 am
by ExtraMile
Re: Missing standard parts
Posted: Thu Apr 16, 2015 7:56 am
by garys
I agree with above post. Live center is an option. If you want one, Shopsmith has them. Power couplers are consumable items. Mine came with 2 originally, and if you don't break them eventually, you aren't using your Shopsmith enough.
Re: Missing standard parts
Posted: Thu Apr 16, 2015 3:00 pm
by jsburger
garys wrote:I agree with above post. Live center is an option. If you want one, Shopsmith has them. Power couplers are consumable items. Mine came with 2 originally, and if you don't break them eventually, you aren't using your Shopsmith enough.
I totally disagree with you on power couplers being a consumable Item. SS only supplys one with new machines AFAIK. Mine only came with one. They are almost indestructible. I have my original from 1994 and it shows almost no signs of ware. I would say if your are breaking power couplers you are abusing your machine.
Re: Missing standard parts
Posted: Thu Apr 16, 2015 3:51 pm
by ChrisNeilan
jsburger wrote:garys wrote:I agree with above post. Live center is an option. If you want one, Shopsmith has them. Power couplers are consumable items. Mine came with 2 originally, and if you don't break them eventually, you aren't using your Shopsmith enough.
I totally disagree with you on power couplers being a consumable Item. SS only supplys one with new machines AFAIK. Mine only came with one. They are almost indestructible. I have my original from 1994 and it shows almost no signs of ware. I would say if your are breaking power couplers you are abusing your machine.
I have an original 10ER coupler that is still good as well as my 1982 coupler! (And I know I don't use them enough!)