Not quite a ton of white oak but, it sure feels like it.
- OURPC - Bones 1.jpg (96.83 KiB) Viewed 2450 times
Mr. Morris' Bones
Moderator: admin
Mr. Morris' Bones
Aside from the armrests, these are the parts for two Morris chairs I'm building for our son and his new bride.
Not quite a ton of white oak but, it sure feels like it.
Not quite a ton of white oak but, it sure feels like it.
Re: Mr. Morris' Bones
Looks good, Gene! I know where you are now!
A ton?- Almost! Yes, the weight alone is enough to make you realize the scope of your project. But look at the number of pieces. That's also enough to make you take a big gulp.
Best wishes on your project. Keep us posted!
A ton?- Almost! Yes, the weight alone is enough to make you realize the scope of your project. But look at the number of pieces. That's also enough to make you take a big gulp.
Best wishes on your project. Keep us posted!
Octogenarian's have an earned right to be a curmudgeon.
Chuck in Lancaster, CA
Chuck in Lancaster, CA
Re: Mr. Morris' Bones
Dang that is a LOT of tenons that need corresponding mortises!! 
And if I remember correctly only a few are at 90 degrees!
I enlarged the picture and that is some FINE oak you have there!!
You will make an excellent present(s) that will be treasured for a lifetime!!
Be well,
Ben
And if I remember correctly only a few are at 90 degrees!I enlarged the picture and that is some FINE oak you have there!!
You will make an excellent present(s) that will be treasured for a lifetime!!
Be well,
Ben
Re: Mr. Morris' Bones
Yeah, Chuck. The plans didn't adequately convey the enormity of the different pieces. Then, double it.
Glad you found me. I often don't know/remember where I am.
Ben, There are indeed a great number of M/T joints. Although they are hidden in the pic, all the mortises have been cut.
All the oak started out as 8/4 and 10/4 and was all re-sawn to 1 1/6 for the main frame parts. The legs were glue ups. Then there was all the 3/8 stuff for the various slats.
Tomorrow, we're headed north to Lake Powell for a week long house boat trip. The tenons are one of the first jobs when we get home.
Thanks for the comments, guys.
Glad you found me. I often don't know/remember where I am.
Ben, There are indeed a great number of M/T joints. Although they are hidden in the pic, all the mortises have been cut.
All the oak started out as 8/4 and 10/4 and was all re-sawn to 1 1/6 for the main frame parts. The legs were glue ups. Then there was all the 3/8 stuff for the various slats.
Tomorrow, we're headed north to Lake Powell for a week long house boat trip. The tenons are one of the first jobs when we get home.
Thanks for the comments, guys.
Last edited by Gene Howe on Sat Jul 04, 2015 6:03 pm, edited 1 time in total.
-
masonsailor2
- Platinum Member
- Posts: 1564
- Joined: Wed Feb 05, 2014 11:57 am
- Location: Las Vegas NV
Re: Mr. Morris' Bones
That will keep you busy for a while !
Paul
Paul