A while back in the shop (drilled glass platter)
Posted: Fri Aug 28, 2015 11:40 pm
The place we have in the UP of MI (soon to no longer be ours). Had a hanging lamp over the dinning room table that lost is glass shade before I ever knew it. It is an old pull down lamp with three bulbs and a cloth cord. Perhaps from the 1920 or maybe even earlier, so modern stuff just did not fit.
One day shopping at a thrift store I came across this clear glass platter that looked to be about the right size so I spent the $1 on it and sure enough it was just about what I was looking for.
I already owned a glass drill bit so I drilled it and took it up there and the fit was pretty good. Since I have no idea what the original looked like this might be close or totally off the wall but it works for me.
I forgot to take pictures until my last trip and then it was already dark so I shot with the light on and planned to take some more shots the next morning before I left. Forgot to do that but here is what I do have.
It was a fun project and well worth the expense and effort. I hope it gives someone another idea of what can be done if you think just a little out of the box.
Ed
One day shopping at a thrift store I came across this clear glass platter that looked to be about the right size so I spent the $1 on it and sure enough it was just about what I was looking for.
I already owned a glass drill bit so I drilled it and took it up there and the fit was pretty good. Since I have no idea what the original looked like this might be close or totally off the wall but it works for me.
I forgot to take pictures until my last trip and then it was already dark so I shot with the light on and planned to take some more shots the next morning before I left. Forgot to do that but here is what I do have.
It was a fun project and well worth the expense and effort. I hope it gives someone another idea of what can be done if you think just a little out of the box.
Ed