Today in the shop (umbrella light 2)
Posted: Wed Dec 16, 2015 11:13 pm
Sometimes the darkness is your friend, sometimes those shadows work for you. Then again there are times when the light is your friend and those shadows have to be put back in the shadows. Do you know what I mean?
So I got a second umbrella light, this one is the same as the other one and I can only speak for this particular one when I tell you what I did to modify it to work in yet another unusual way, we will get to that in a short while.
I had mentioned before in the first umbrella light thread that I wanted one of these for my camera. Stock off the shelf it wouldn't fit my camera, it might yours??? So when I took it apart I had to look at what structure was in place and where things like the wires ran and the like. It seemed reasonable that one could make a small change or two and see where that lead. For the price you might end up with some inexpensive trash or you might end up with a usable light system.
I set up at the drill press and installed a 2-1/2 hole saw and proceeded to enlarge the hole. I tried this and it was still too tight to lock closed. I then came back with a 2-9/16 hole saw. That worked very well, or at least let us say it is adequate. So lets start with a picture of how it now looks on the camera.
The very next thing to do is to take a picture without and with the light on.
The are two light sources at play here, a desk lamp and an overhead light. The shadows are a result of those two light sources and there location. The foreground shadow to the right is my head.......
So now lets turn on the umbrella light.
You can see there is still a slight shadow from the desk lamp but look inside the block and where is my heads shadow. Washed away is where.
So now it is time that we order our second light and make your camera proud.
Ed
So I got a second umbrella light, this one is the same as the other one and I can only speak for this particular one when I tell you what I did to modify it to work in yet another unusual way, we will get to that in a short while.
I had mentioned before in the first umbrella light thread that I wanted one of these for my camera. Stock off the shelf it wouldn't fit my camera, it might yours??? So when I took it apart I had to look at what structure was in place and where things like the wires ran and the like. It seemed reasonable that one could make a small change or two and see where that lead. For the price you might end up with some inexpensive trash or you might end up with a usable light system.
I set up at the drill press and installed a 2-1/2 hole saw and proceeded to enlarge the hole. I tried this and it was still too tight to lock closed. I then came back with a 2-9/16 hole saw. That worked very well, or at least let us say it is adequate. So lets start with a picture of how it now looks on the camera.
The very next thing to do is to take a picture without and with the light on.
The are two light sources at play here, a desk lamp and an overhead light. The shadows are a result of those two light sources and there location. The foreground shadow to the right is my head.......
So now lets turn on the umbrella light.
You can see there is still a slight shadow from the desk lamp but look inside the block and where is my heads shadow. Washed away is where.
So now it is time that we order our second light and make your camera proud.
Ed