Shopsmith Forums

old mark vii parts -501361,501362,501365 and parts for the carriage
parts 28 thur 32 if anyone has for sell let me know please.

hobbies wrote:old mark vii parts -501361,501362,501365 and parts for the carriage
parts 28 thur 32 if anyone has for sell let me know please.

Description would help since we do not know what list/drawing you are referring to.

hobbies wrote:old mark vii parts -501361,501362,501365 and parts for the carriage
parts 28 thur 32 if anyone has for sell let me know please.

is the table height handle
501361,2,3 are for cam clutch

hobbies wrote:

hobbies wrote:old mark vii parts -501361,501362,501365 and parts for the carriage
parts 28 thur 32 if anyone has for sell let me know please.

is the table height handle
501361,2,3 are for cam clutch

The cam clutch parts will be difficult to obtain. A used set on or off a belt cover may be the only way to get them. Watch clist and ebay and wait!.

I am confused re the table height handle.

What carriage parts?

I have a spare parts machine that still has a lot of parts left. .... be more clear with the description on what your looking for and I'll check to see if I have it.

its the handle that folds up and locks the carriage in place.
and the little handle thats on the belt cover that makes cam to disingage

this is a old magna vii need parts for.

found a part manual for the mark VII on the SSUG.org forums
here is the link for the parts manual for a Mark VII

http://www.ssug.org/index.php/document- ... rts-manual

lyall wrote:found a part manual for the mark VII on the SSUG.org forums
here is the link for the parts manual for a Mark VII

http://www.ssug.org/index.php/document- ... rts-manual

Be aware that is an early version with known errors(motor wiring).

I do not know it there are other errors.

thats the same manual i have i was going by the parts numbers that on there,
for the parts i need.