Page 1 of 1

Jackpot!

Posted: Thu May 26, 2016 10:20 pm
by lilgodwin
I'll be leaving SoCal soon, but in the last couple years I've been here, I've gotten quite a few job offers out of seemingly nowhere. Probably the most interesting one is the guy who offered me a supervisory job at an Amgen based pharmaceutical manufacturing location. But, apparently the FDA is really difficult to work with, so I don't think that operation ever took off.

On to the point. I went driving around last week to cabinet shops, of which there are probably 15 or so within a 10-15 minute drive. Naturally, I was looking for scraps. One yielded some REALLY nice results, in my eyes anyway. The guy, who I find out later is the owner's father, was real friendly and generous and gave me a large pile sitting against the wall. Mostly the wood was mahogany. Some maple thrown in and I think a good sized piece of teak and a piece or two of light/soft (?) maple. He said I was welcome to grab anything out of the trash bins too. Smaller pieces were in there naturally, but I'm not picky. I'm just stocking up. He invited me to come back anytime and grab more scraps.

Tuesday I go over there and he wasn't there. Another worker got me in contact with the owner and he seemed less willing to give stuff away, but said to come back a little later and he'll be there to let me pick up some scraps out of the bins.

I showed back up and meet with the owner. He basically said that they've been working with a lot of teak lately and he doesn't really give any of that away. I know nothing of the wood at this point, so it doesn't make a difference to me what type I get. Free is free. He said I can pick through the trash bins. Obviously I'm not getting any large cuts like I did the first time.

We chat for a bit and he warms up to me some. He ends up offering me a job helping out, making furniture, etc. Another job offer, wow, but I'm not complaining. I couldn't stress enough that I lack any experience, and I basically tell him I wouldn't be any good around the shop, plus I've got a few trips planned soon and I'm leaving in 2.5 months so I wouldn't want to commit to anything.

He's persistent on hiring me and asked if I'd be willing to come in whenever I want and help keep the shop cleaned, and even learn about woodworking and help them out. After clarifying how little I know about woodworking, I graciously accept. He said I could write my own ticket, he'd pay me $10/hr, and hinted at some better scraps.

So I showed up yesterday for 2.5 hours and today for about 3 and just cleaned up the sawdust and shavings. Today when I got there he said he had some scraps saved for me, and showed me to the back where he had a good number of decent sized cuts of maple, Douglas fir (apparently 'fir' wasn't in my phone's dictionary)... And teak! By this point he had explained to me quite a bit about teak. He pointed to a few boards and told me they were worth about $8,000 in total. And he said the 7-9 pieces he gave me were worth about $40 each at a woodcraft store.

Come to find out, their current project is an order from MGM Grand in Las Vegas! Pretty awesome. Hence all the teak.


It's not the largest shop I wouldn't think, and there's only 3 guys that I know of besides the owner.

All in all, I'm really happy and thankful for this experience. It's pretty cool and unexpected. A nice side gig and "free" wood too! I was on the motorcycle today so I only took about 1/4 of today's stack and put it in my large backpack. I use that thing for about a week's worth of groceries frequently. I rode home with long cuts of teak hanging out the top for all to see [emoji1] haha

Here's what I've brought home so far, minus a large pile of small pieces that are sitting in the trunk of my car. And I still have quite a bit at the shop waiting for me.

Image

Image

Image

Just had to share.

Re: Jackpot!

Posted: Thu May 26, 2016 11:12 pm
by JPG
Win Win Win

Free scraps

Some jingle

And likely some education.

Re: Jackpot!

Posted: Thu May 26, 2016 11:41 pm
by ERLover
Nice catch, and get the experience!! But most of that wood is short ends, so what to do with it if you are not a turner?? I have boxes or short end Maple, Cherry and Walnut. End grain cutting boards, I am not a turner, so just saving them till what ever???? Just a thought.

Re: Jackpot!

Posted: Thu May 26, 2016 11:52 pm
by lilgodwin
I haven't a clue what sort ends are, or why that's an issue. And I don't plan on any large projects for the time being, so I think they're fine for me.

Care to explain?

Re: Jackpot!

Posted: Fri May 27, 2016 1:02 am
by JPG
Short cutoffs.

What is left after cutting something to length.

Only significant if you need a 'longer' piece.

A bit negative because end grain to end grain does not glue up.

Just enjoy what you get!

Re: Jackpot!

Posted: Fri May 27, 2016 2:18 am
by lilgodwin
Ah, got it, thanks. And that's alright. I'll definitely be enjoying experimenting and making smaller objects for quite some time.

Re: Jackpot!

Posted: Fri May 27, 2016 8:19 am
by mdwine
Nicely done!
You have quite the 'pen turners stash' going there.
Pens take little wood, and yield a lot of satisfaction.
I got started my turning using my SS!

Congrats!

Re: RE: Re: Jackpot!

Posted: Fri May 27, 2016 2:19 pm
by lilgodwin
mdwine wrote:Nicely done!
You have quite the 'pen turners stash' going there.
Pens take little wood, and yield a lot of satisfaction.
I got started my turning using my SS!

Congrats!
I'm really interested in starting the turning process. I picked up about 350 3/4"x18" hickory dowels for free off craigslist I'm planning to turn into pens. Don't know anything about hickory, but I'm hoping it's manageable.

I'm also looking to get a faceplate soon so I can dabble in turning larger objects.

Re: Jackpot!

Posted: Fri May 27, 2016 9:18 pm
by roy_okc
Even tiny pieces of hardwood can be saved for segmented turning projects. Nice score all around!